Bootdata ok (command line is root=0303 noapic)
Linux version 2.4.21-2 (root@go9) (gcc version 3.2.2 (Turbolinux 3.2.2-5)) #1 Thu Oct 2 03:07:06 JST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff40000 (usable)
BIOS-e820: 000000003ff40000 - 000000003ff50000 (ACPI data)
BIOS-e820: 000000003ff50000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
kernel direct mapping tables upto 10100000000 @ 8000-c000
ACPI: have wakeup address 0x10000001000
Scan SMP from 0000010000000000 for 1024 bytes.
Scan SMP from 000001000009fc00 for 1024 bytes.
Scan SMP from 00000100000f0000 for 65536 bytes.
found SMP MP-table at 00000000000ff780
hm, page 000ff000 reserved twice.
hm, page 00100000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 261952
zone(0): 4096 pages.
zone(1): 257856 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa530
ACPI: RSDT (v001 A M I OEMRSDT 04352.00793) @ 0x000000003ff40000
ACPI: FADT (v002 A M I OEMFACP 04352.00793) @ 0x000000003ff40200
ACPI: MADT (v001 A M I OEMAPIC 04352.00793) @ 0x000000003ff40390
ACPI: OEMB (v001 A M I OEMBIOS 04352.00793) @ 0x000000003ff50040
ACPI: DSDT (v001 SK8N_ SK8N_404 00000.01028) @ 0x0000000000000000
ACPI: Parsing Local APIC info in MADT
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: TEMPLATE Product ID: SK8N APIC at: 0xFEE00000
I/O APIC #1 Version 17 at 0xFEC00000.
Processors: 1
Checking aperture...
CPU 0: aperture @ f0000000 size 128 MB
Building zonelist for node : 0
Kernel command line: root=0303 noapic
Initializing CPU#0
spurious 8259A interrupt: IRQ7.
time.c: Detected 1.193182 MHz PIT timer.
time.c: Detected 1400.010 MHz TSC timer.
Console: colour VGA+ 80x25
Calibrating delay loop... 2791.83 BogoMIPS
Memory: 1021460k/1047808k available (1870k kernel code, 25960k reserved, 579k data, 156k init)
Dentry cache hash table entries: 131072 (order: 9, 2097152 bytes)
Inode cache hash table entries: 65536 (order: 8, 1048576 bytes)
Mount cache hash table entries: 256 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 65536 (order: 7, 524288 bytes)
Page-cache hash table entries: 262144 (order: 9, 2097152 bytes)
CPU: L1 I Cache: 64K (64 bytes/line/2 way), D cache 64K (64 bytes/line/2 way)
CPU: L2 Cache: 1024K (64 bytes/line/8 way)
Machine Check Reporting enabled for CPU#0
POSIX conformance testing by UNIFIX
testing NMI watchdog ... OK.
ENABLING IO-APIC IRQs
Setting 1 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 1 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
number of MP IRQ sources: 16.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 01000000
....... : arbitration: 01
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 001 01 0 0 0 0 0 1 1 31
01 001 01 0 0 0 0 0 1 1 39
02 000 00 1 0 0 0 0 0 0 00
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 1 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
Detected 12.500 MHz APIC timer.
cpu: 0, clocks: 2000015, slice: 1000007
CPU0
mtrr: v2.02 (20020716))
ACPI: Subsystem revision 20030619
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUS0] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUS1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUS2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LKLN] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LAUI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LKMO] (IRQs 3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LTID] (IRQs 3 4 5 7 9 10 11 12 14 15)
ACPI-0145: *** Error: Return object type is incorrect [\_SB_.LATA._CRS] (Node 0000010002632a40), AE_TYPE
ACPI: PCI Interrupt Link [LATA] (IRQs 3 4 6 7 10 11 12 14 15)
PCI: Using configuration type 1
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LKSM] enabled at IRQ 9
00:00:01[A] -> IRQ 9 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 7
00:00:02[A] -> IRQ 7 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 5
00:00:06[A] -> IRQ 5 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LKMO] enabled at IRQ 9
PIC: IRQ (9) already programmed
ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 5
PIC: IRQ (5) already programmed
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 10
00:00:02[C] -> IRQ 10 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
00:00:0b[A] -> IRQ 11 Mode 1 Trigger 1
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 11
PIC: IRQ (11) already programmed
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PIC: IRQ (9) already programmed
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PIC: IRQ (9) already programmed
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PIC: IRQ (5) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (5) already programmed
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: Detected NVIDIA nForce3/K8 On-CPU GART chipset
agpgart: AGP aperture is 128M @ 0xf0000000
PCI-DMA: Disabling IOMMU.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
kinoded started
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 65488
aio_setup: sizeof(struct page) = 88
Journalled Block Device driver loaded
IA32 emulation $Id: sys_ia32.c,v 1.60 2003/07/11 15:58:45 ak Exp $
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3: IDE controller at PCI slot 00:08.0
NFORCE3: chipset revision 165
NFORCE3: not 100% native mode: will probe irqs later
AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD_IDE: PCI device 10de:00d5 (rev a5) UDMA133 controller on pci00:08.0
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 98196H8, ATA DISK drive
blk: queue ffffffff803ded60, no I/O memory limit
hdc: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(100)
Partition check:
hda: [PTBL] [9964/255/63] hda1 hda2 hda3 hda4
SCSI subsystem driver Revision: 1.00
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5+(mp-v6a)(22/07/2002)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 1 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... okay
Freeing unused kernel memory: 156k freed
Adding Swap: 2096472k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xffffff0000156000, IRQ 7
usb-ohci.c: usb-00:02.0, PCI device 10de:00d7
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xffffff0000158000, IRQ 5
usb-ohci.c: usb-00:02.1, PCI device 10de:00d7
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.2 to 64
ehci_hcd 00:02.2: PCI device 10de:00d8
ehci_hcd 00:02.2: irq 10, pci mem ffffff000015ac00
usb.c: new USB bus registered, assigned bus number 3
PCI: 00:02.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:02.2 PCI cache line size corrected to 64.
ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 6 ports detected
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
kjournald starting. Commit interval 1 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 1 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
8139too Fast Ethernet driver 0.9.26
eth0: D-Link DFE-538TX (RealTek RTL8139) at 0xffffff000015cc00, 00:40:05:35:e6:d8, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
ohci1394: $Rev: 1045 $ Ben Collins
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[ff4ef000-ff4ef7ff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800002ac4df]
PCI: Setting latency timer of device 00:06.0 to 64
intel8x0: clocking to 47378
lp: driver loaded but no devices found