[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.1-gentoo-r2 (root@squidward) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #4 SMP Thu Mar 8 13:16:15 UTC 2012
[ 0.000000] Command line: root=/dev/sda3
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
[ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cbba8000 (usable)
[ 0.000000] BIOS-e820: 00000000cbba8000 - 00000000cbc2a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cbc2a000 - 00000000cbd41000 (reserved)
[ 0.000000] BIOS-e820: 00000000cbd41000 - 00000000cbd55000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cbd55000 - 00000000cbe56000 (reserved)
[ 0.000000] BIOS-e820: 00000000cbe56000 - 00000000cbe5e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cbe5e000 - 00000000cbe68000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cbe68000 - 00000000cbe8a000 (reserved)
[ 0.000000] BIOS-e820: 00000000cbe8a000 - 00000000cbe90000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cbe90000 - 00000000cc000000 (usable)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000012c000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: /DG45ID, BIOS IDG4510H.86A.0135.2011.0225.1100 02/25/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x12c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 base 12C000000 mask FFC000000 uncachable
[ 0.000000] 6 base 130000000 mask FF0000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cc000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcc000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cc000000
[ 0.000000] 0000000000 - 00cc000000 page 2M
[ 0.000000] kernel direct mapping tables up to cc000000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000012c000000
[ 0.000000] 0100000000 - 012c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 12c000000 @ cbffa000-cc000000
[ 0.000000] ACPI: RSDP 00000000000f03c0 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000cbe5ce18 00044 (v01 INTEL DG45ID 00000087 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000cbe5bd98 000F4 (v04 INTEL A M I 06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCBE5FF40/0x00000000CBE65E40, using 32 (20110623/tbfadt-489)
[ 0.000000] ACPI: DSDT 00000000cbe56018 0492F (v01 INTEL DG45ID 00000087 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cbe5ff40 00040
[ 0.000000] ACPI: APIC 00000000cbe5bf18 0006C (v02 INTEL DG45ID 00000087 MSFT 00010013)
[ 0.000000] ACPI: MCFG 00000000cbe66d98 0003C (v01 INTEL DG45ID 00000087 MSFT 00000097)
[ 0.000000] ACPI: ASF! 00000000cbe65c18 000A0 (v32 INTEL DG45ID 00000087 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000012c000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000012c000000
[ 0.000000] NODE_DATA [000000012bffb000 - 000000012bffffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880127600000-ffff88012b5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0012c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cbba8
[ 0.000000] 0: 0x000cbe90 -> 0x000cc000
[ 0.000000] 0: 0x00100000 -> 0x0012c000
[ 0.000000] On node 0 totalpages: 1014950
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 814424 pages, LIFO batch:31
[ 0.000000] Normal zone: 2816 pages used for memmap
[ 0.000000] Normal zone: 177408 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cbba8000 - 00000000cbc2a000
[ 0.000000] PM: Registered nosave memory: 00000000cbc2a000 - 00000000cbd41000
[ 0.000000] PM: Registered nosave memory: 00000000cbd41000 - 00000000cbd55000
[ 0.000000] PM: Registered nosave memory: 00000000cbd55000 - 00000000cbe56000
[ 0.000000] PM: Registered nosave memory: 00000000cbe56000 - 00000000cbe5e000
[ 0.000000] PM: Registered nosave memory: 00000000cbe5e000 - 00000000cbe68000
[ 0.000000] PM: Registered nosave memory: 00000000cbe68000 - 00000000cbe8a000
[ 0.000000] PM: Registered nosave memory: 00000000cbe8a000 - 00000000cbe90000
[ 0.000000] PM: Registered nosave memory: 00000000cc000000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cc000000 (gap: cc000000:32d1c000)
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88012bc00000 s75840 r8192 d22464 u524288
[ 0.000000] pcpu-alloc: s75840 r8192 d22464 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995745
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda3
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3915180k/4915200k available (6682k kernel code, 855400k absent, 144620k reserved, 4147k data, 640k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2999.463 MHz processor.
[ 0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5998.92 BogoMIPS (lpj=2999463)
[ 0.001112] pid_max: default: 32768 minimum: 301
[ 0.001180] Security Framework initialized
[ 0.001234] SELinux: Initializing.
[ 0.001290] SELinux: Starting in permissive mode
[ 0.001547] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003437] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004288] Mount-cache hash table entries: 256
[ 0.004469] Initializing cgroup subsys cpuacct
[ 0.004525] Initializing cgroup subsys freezer
[ 0.004600] CPU: Physical Processor ID: 0
[ 0.004652] CPU: Processor Core ID: 0
[ 0.004703] mce: CPU supports 6 MCE banks
[ 0.004759] CPU0: Thermal monitoring enabled (TM2)
[ 0.004814] using mwait in idle threads.
[ 0.004903] ACPI: Core revision 20110623
[ 0.006999] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.017110] CPU0: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a
[ 0.017998] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.017998] ... version: 2
[ 0.017998] ... bit width: 40
[ 0.017998] ... generic registers: 2
[ 0.017998] ... value mask: 000000ffffffffff
[ 0.017998] ... max period: 000000007fffffff
[ 0.017998] ... fixed-purpose events: 3
[ 0.017998] ... event mask: 0000000700000003
[ 0.017998] Booting Node 0, Processors #1
[ 0.017998] smpboot cpu 1: start_ip = 99000
[ 0.089075] #2
[ 0.089099] smpboot cpu 2: start_ip = 99000
[ 0.161042] #3 Ok.
[ 0.161090] smpboot cpu 3: start_ip = 99000
[ 0.232978] Brought up 4 CPUs
[ 0.233050] Total of 4 processors activated (23993.59 BogoMIPS).
[ 0.235138] PM: Registering ACPI NVS region at cbba8000 (532480 bytes)
[ 0.235138] PM: Registering ACPI NVS region at cbd41000 (81920 bytes)
[ 0.235138] PM: Registering ACPI NVS region at cbe5e000 (40960 bytes)
[ 0.235180] PM: Registering ACPI NVS region at cbe8a000 (24576 bytes)
[ 0.235306] RTC time: 11:05:02, date: 03/15/12
[ 0.235384] NET: Registered protocol family 16
[ 0.235470] kworker/u:0 used greatest stack depth: 5512 bytes left
[ 0.236027] ACPI: bus type pci registered
[ 0.236087] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.236091] PCI: not using MMCONFIG
[ 0.236141] PCI: Using configuration type 1 for base access
[ 0.248047] bio: create slab at 0
[ 0.249170] ACPI: Added _OSI(Module Device)
[ 0.249170] ACPI: Added _OSI(Processor Device)
[ 0.249170] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.249170] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.250123] ACPI: EC: Look up EC in DSDT
[ 0.250831] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.252249] ACPI: SSDT 00000000cbe5fc18 002CC (v01 AMI IST 00000001 MSFT 03000001)
[ 0.252553] ACPI: Dynamic OEM Table Load:
[ 0.252639] ACPI: SSDT (null) 002CC (v01 AMI IST 00000001 MSFT 03000001)
[ 0.252924] ACPI: Interpreter enabled
[ 0.252975] ACPI: (supports S0 S3 S4 S5)
[ 0.253120] ACPI: Using IOAPIC for interrupt routing
[ 0.253220] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.253332] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
[ 0.273058] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.278048] ACPI: No dock devices found.
[ 0.278090] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.278279] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.279016] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.279073] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.279130] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.279215] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
[ 0.279307] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.279335] pci 0000:00:02.0: [8086:2e22] type 0 class 0x000300
[ 0.279344] pci 0000:00:02.0: reg 10: [mem 0xe2400000-0xe27fffff 64bit]
[ 0.279349] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.279353] pci 0000:00:02.0: reg 20: [io 0xf1c0-0xf1c7]
[ 0.279372] pci 0000:00:02.1: [8086:2e23] type 0 class 0x000380
[ 0.279379] pci 0000:00:02.1: reg 10: [mem 0xe2800000-0xe28fffff 64bit]
[ 0.279416] pci 0000:00:03.0: [8086:2e24] type 0 class 0x000780
[ 0.279440] pci 0000:00:03.0: reg 10: [mem 0xe2b21900-0xe2b2190f 64bit]
[ 0.279510] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.279513] pci 0000:00:03.0: PME# disabled
[ 0.279549] pci 0000:00:19.0: [8086:10cd] type 0 class 0x000200
[ 0.279564] pci 0000:00:19.0: reg 10: [mem 0xe2b00000-0xe2b1ffff]
[ 0.279571] pci 0000:00:19.0: reg 14: [mem 0xe2b20000-0xe2b20fff]
[ 0.279578] pci 0000:00:19.0: reg 18: [io 0xf0e0-0xf0ff]
[ 0.279617] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.279620] pci 0000:00:19.0: PME# disabled
[ 0.279635] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.279669] pci 0000:00:1a.0: reg 20: [io 0xf0c0-0xf0df]
[ 0.279707] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.279752] pci 0000:00:1a.1: reg 20: [io 0xf0a0-0xf0bf]
[ 0.279787] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.279822] pci 0000:00:1a.2: reg 20: [io 0xf080-0xf09f]
[ 0.279865] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.279882] pci 0000:00:1a.7: reg 10: [mem 0xe2b21400-0xe2b217ff]
[ 0.279999] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.280002] pci 0000:00:1a.7: PME# disabled
[ 0.280021] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.280064] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.280068] pci 0000:00:1c.0: PME# disabled
[ 0.280090] pci 0000:00:1c.3: [8086:3a46] type 1 class 0x000604
[ 0.280134] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.280137] pci 0000:00:1c.3: PME# disabled
[ 0.280155] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[ 0.280198] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.280201] pci 0000:00:1c.4: PME# disabled
[ 0.280222] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.280256] pci 0000:00:1d.0: reg 20: [io 0xf060-0xf07f]
[ 0.280292] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.280326] pci 0000:00:1d.1: reg 20: [io 0xf040-0xf05f]
[ 0.280363] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.280397] pci 0000:00:1d.2: reg 20: [io 0xf020-0xf03f]
[ 0.280441] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.280459] pci 0000:00:1d.7: reg 10: [mem 0xe2b21000-0xe2b213ff]
[ 0.280519] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.280523] pci 0000:00:1d.7: PME# disabled
[ 0.280539] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.280585] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 0.280658] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.280666] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.280787] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[ 0.280801] pci 0000:00:1f.2: reg 10: [io 0xf1b0-0xf1b7]
[ 0.280808] pci 0000:00:1f.2: reg 14: [io 0xf1a0-0xf1a3]
[ 0.280814] pci 0000:00:1f.2: reg 18: [io 0xf190-0xf197]
[ 0.280826] pci 0000:00:1f.2: reg 1c: [io 0xf180-0xf183]
[ 0.280833] pci 0000:00:1f.2: reg 20: [io 0xf170-0xf17f]
[ 0.280839] pci 0000:00:1f.2: reg 24: [io 0xf160-0xf16f]
[ 0.280869] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.280881] pci 0000:00:1f.3: reg 10: [mem 0xe2b21800-0xe2b218ff 64bit]
[ 0.280898] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.280924] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[ 0.280937] pci 0000:00:1f.5: reg 10: [io 0xf150-0xf157]
[ 0.280943] pci 0000:00:1f.5: reg 14: [io 0xf140-0xf143]
[ 0.280950] pci 0000:00:1f.5: reg 18: [io 0xf130-0xf137]
[ 0.280956] pci 0000:00:1f.5: reg 1c: [io 0xf120-0xf123]
[ 0.280962] pci 0000:00:1f.5: reg 20: [io 0xf110-0xf11f]
[ 0.280973] pci 0000:00:1f.5: reg 24: [io 0xf100-0xf10f]
[ 0.281030] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.281145] pci 0000:02:00.0: [8086:10d3] type 0 class 0x000200
[ 0.281167] pci 0000:02:00.0: reg 10: [mem 0xe2ac0000-0xe2adffff]
[ 0.281183] pci 0000:02:00.0: reg 14: [mem 0xe2a00000-0xe2a7ffff]
[ 0.281199] pci 0000:02:00.0: reg 18: [io 0xe000-0xe01f]
[ 0.281215] pci 0000:02:00.0: reg 1c: [mem 0xe2ae0000-0xe2ae3fff]
[ 0.281259] pci 0000:02:00.0: reg 30: [mem 0xe2a80000-0xe2abffff pref]
[ 0.281308] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.281314] pci 0000:02:00.0: PME# disabled
[ 0.282983] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.283043] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.283047] pci 0000:00:1c.3: bridge window [mem 0xe2a00000-0xe2afffff]
[ 0.283105] pci 0000:03:00.0: [13c1:1004] type 0 class 0x000104
[ 0.283126] pci 0000:03:00.0: reg 10: [mem 0xe0000000-0xe1ffffff 64bit pref]
[ 0.283143] pci 0000:03:00.0: reg 18: [mem 0xe2020000-0xe2020fff 64bit]
[ 0.283154] pci 0000:03:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.283174] pci 0000:03:00.0: reg 30: [mem 0xe2000000-0xe201ffff pref]
[ 0.283204] pci 0000:03:00.0: supports D1 D2
[ 0.284978] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.285038] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.285042] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe20fffff]
[ 0.285079] pci 0000:04:01.0: [11c1:5811] type 0 class 0x000c00
[ 0.285096] pci 0000:04:01.0: reg 10: [mem 0xe2900000-0xe2900fff]
[ 0.285106] pci 0000:04:01.0: reg 14: [mem 0xe2901000-0xe29010ff]
[ 0.285162] pci 0000:04:01.0: supports D1 D2
[ 0.285164] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.285168] pci 0000:04:01.0: PME# disabled
[ 0.285218] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.285285] pci 0000:00:1e.0: bridge window [mem 0xe2900000-0xe29fffff]
[ 0.285290] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.285292] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.285294] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.285296] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.285311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.285377] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.285416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.285436] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.285454] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.285528] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.286060] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.291028] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.291285] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.291587] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.292072] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.292343] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.292631] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.292932] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.293212] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.293525] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.293525] vgaarb: loaded
[ 0.293525] vgaarb: bridge control possible 0000:00:02.0
[ 0.294018] SCSI subsystem initialized
[ 0.294048] libata version 3.00 loaded.
[ 0.294048] usbcore: registered new interface driver usbfs
[ 0.294074] usbcore: registered new interface driver hub
[ 0.294074] usbcore: registered new device driver usb
[ 0.295015] PCI: Using ACPI for IRQ routing
[ 0.297668] PCI: pci_cache_line_size set to 64 bytes
[ 0.297754] reserve RAM buffer: 000000000009e400 - 000000000009ffff
[ 0.297756] reserve RAM buffer: 00000000cbba8000 - 00000000cbffffff
[ 0.297998] NetLabel: Initializing
[ 0.298036] NetLabel: domain hash size = 128
[ 0.298088] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.298149] NetLabel: unlabeled traffic allowed by default
[ 0.298283] hpet clockevent registered
[ 0.298287] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.298346] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.298486] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.302703] Switching to clocksource hpet
[ 0.309560] pnp: PnP ACPI init
[ 0.309615] ACPI: bus type pnp registered
[ 0.309711] pnp 00:00: [bus 00-ff]
[ 0.309712] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.309714] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.309715] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.309717] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.309719] pnp 00:00: [mem 0x00000000 window]
[ 0.309720] pnp 00:00: [mem 0xd0000000-0xffffffff window]
[ 0.309810] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.309832] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.309834] pnp 00:01: [mem 0xf0000000-0xf7ffffff]
[ 0.309836] pnp 00:01: [mem 0xfed08000-0xfed08fff]
[ 0.309924] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.309993] system 00:01: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.310072] system 00:01: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.310129] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.310259] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.310261] pnp 00:02: [io 0x0a20-0x0a3f]
[ 0.310262] pnp 00:02: [io 0x0a00-0x0a1f]
[ 0.310264] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.310265] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.310267] pnp 00:02: [io 0x0b78-0x0b7f]
[ 0.310268] pnp 00:02: [io 0x0f78-0x0f7f]
[ 0.310359] system 00:02: [io 0x0a20-0x0a3f] has been reserved
[ 0.310414] system 00:02: [io 0x0a00-0x0a1f] has been reserved
[ 0.310470] system 00:02: [io 0x0b78-0x0b7f] has been reserved
[ 0.310525] system 00:02: [io 0x0f78-0x0f7f] has been reserved
[ 0.310580] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.310729] pnp 00:03: [io 0x03f8-0x03ff]
[ 0.310737] pnp 00:03: [irq 4]
[ 0.310739] pnp 00:03: [dma 0 disabled]
[ 0.310843] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.310916] pnp 00:04: [dma 4]
[ 0.310918] pnp 00:04: [io 0x0000-0x000f]
[ 0.310919] pnp 00:04: [io 0x0081-0x0083]
[ 0.310920] pnp 00:04: [io 0x0087]
[ 0.310921] pnp 00:04: [io 0x0089-0x008b]
[ 0.310923] pnp 00:04: [io 0x008f]
[ 0.310924] pnp 00:04: [io 0x00c0-0x00df]
[ 0.310991] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.311009] pnp 00:05: [io 0x0070-0x0071]
[ 0.311017] pnp 00:05: [irq 8]
[ 0.311094] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.311100] pnp 00:06: [io 0x0061]
[ 0.311174] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.311186] pnp 00:07: [io 0x0010-0x001f]
[ 0.311188] pnp 00:07: [io 0x0022-0x003f]
[ 0.311189] pnp 00:07: [io 0x0044-0x005f]
[ 0.311190] pnp 00:07: [io 0x0062-0x0063]
[ 0.311192] pnp 00:07: [io 0x0065-0x006f]
[ 0.311193] pnp 00:07: [io 0x0072-0x007f]
[ 0.311194] pnp 00:07: [io 0x0080]
[ 0.311195] pnp 00:07: [io 0x0084-0x0086]
[ 0.311196] pnp 00:07: [io 0x0088]
[ 0.311197] pnp 00:07: [io 0x008c-0x008e]
[ 0.311199] pnp 00:07: [io 0x0090-0x009f]
[ 0.311200] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.311201] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.311203] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.311297] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.311352] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.311359] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.311363] pnp 00:08: [irq 13]
[ 0.311434] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.311513] pnp 00:09: [io 0x0400-0x047f]
[ 0.311514] pnp 00:09: [io 0x1180-0x119f]
[ 0.311516] pnp 00:09: [io 0x0500-0x057f]
[ 0.311517] pnp 00:09: [io 0x0060]
[ 0.311518] pnp 00:09: [io 0x0064]
[ 0.311520] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.311521] pnp 00:09: [mem 0xfec00000-0xfecfffff]
[ 0.311522] pnp 00:09: [mem 0xfee00000-0xfee0ffff]
[ 0.311526] pnp 00:09: [mem 0xfed20000-0xfed9ffff]
[ 0.311527] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 0.311624] system 00:09: [io 0x0400-0x047f] has been reserved
[ 0.311680] system 00:09: [io 0x1180-0x119f] has been reserved
[ 0.311734] system 00:09: [io 0x0500-0x057f] has been reserved
[ 0.311790] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.311846] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.311904] system 00:09: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.311960] system 00:09: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.312049] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.312106] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.312218] pnp: PnP ACPI: found 10 devices
[ 0.312269] ACPI: ACPI bus type pnp unregistered
[ 0.317043] PCI: max bus depth: 1 pci_try_num: 2
[ 0.317071] pci 0000:00:1c.4: BAR 15: assigned [mem 0xe2100000-0xe22fffff 64bit pref]
[ 0.317158] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe2c00000-0xe2dfffff 64bit pref]
[ 0.317244] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe2e00000-0xe2ffffff]
[ 0.317301] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe3000000-0xe31fffff 64bit pref]
[ 0.317387] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.317443] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.317498] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.317556] pci 0000:00:1c.0: bridge window [mem 0xe2e00000-0xe2ffffff]
[ 0.317614] pci 0000:00:1c.0: bridge window [mem 0xe3000000-0xe31fffff 64bit pref]
[ 0.317702] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.317757] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.317815] pci 0000:00:1c.3: bridge window [mem 0xe2a00000-0xe2afffff]
[ 0.317873] pci 0000:00:1c.3: bridge window [mem 0xe2c00000-0xe2dfffff 64bit pref]
[ 0.317961] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.318033] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.318098] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe20fffff]
[ 0.318168] pci 0000:00:1c.4: bridge window [mem 0xe2100000-0xe22fffff 64bit pref]
[ 0.318257] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.318313] pci 0000:00:1e.0: bridge window [mem 0xe2900000-0xe29fffff]
[ 0.318383] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.318442] pci 0000:00:1c.0: setting latency timer to 64
[ 0.318449] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.318507] pci 0000:00:1c.3: setting latency timer to 64
[ 0.318512] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.318570] pci 0000:00:1c.4: setting latency timer to 64
[ 0.318575] pci 0000:00:1e.0: setting latency timer to 64
[ 0.318578] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.318580] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.318581] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.318583] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xffffffff]
[ 0.318585] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.318586] pci_bus 0000:01: resource 1 [mem 0xe2e00000-0xe2ffffff]
[ 0.318588] pci_bus 0000:01: resource 2 [mem 0xe3000000-0xe31fffff 64bit pref]
[ 0.318590] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.318592] pci_bus 0000:02: resource 1 [mem 0xe2a00000-0xe2afffff]
[ 0.318593] pci_bus 0000:02: resource 2 [mem 0xe2c00000-0xe2dfffff 64bit pref]
[ 0.318595] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.318597] pci_bus 0000:03: resource 1 [mem 0xe0000000-0xe20fffff]
[ 0.318599] pci_bus 0000:03: resource 2 [mem 0xe2100000-0xe22fffff 64bit pref]
[ 0.318600] pci_bus 0000:04: resource 1 [mem 0xe2900000-0xe29fffff]
[ 0.318602] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.318604] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.318605] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.318607] pci_bus 0000:04: resource 7 [mem 0xd0000000-0xffffffff]
[ 0.318632] NET: Registered protocol family 2
[ 0.318788] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.319658] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.322406] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.322863] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.322920] TCP reno registered
[ 0.322975] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.323089] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.323265] NET: Registered protocol family 1
[ 0.323443] RPC: Registered named UNIX socket transport module.
[ 0.323498] RPC: Registered udp transport module.
[ 0.323551] RPC: Registered tcp transport module.
[ 0.323604] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.323671] pci 0000:00:02.0: Boot video device
[ 0.323682] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x1f30
[ 0.323684] pci 0000:00:1a.0: Performing full reset
[ 0.323699] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.323701] pci 0000:00:1a.1: Performing full reset
[ 0.323716] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.323717] pci 0000:00:1a.2: Performing full reset
[ 0.323750] pci 0000:00:1a.7: EHCI: BIOS handoff
[ 1.423012] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 1.423193] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
[ 1.423195] pci 0000:00:1d.0: Performing full reset
[ 1.423210] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
[ 1.423211] pci 0000:00:1d.1: Performing full reset
[ 1.423226] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
[ 1.423228] pci 0000:00:1d.2: Performing full reset
[ 1.423266] pci 0000:00:1d.7: EHCI: BIOS handoff
[ 2.523011] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.523198] PCI: CLS 64 bytes, default 64
[ 2.523269] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.523326] Placing 64MB software IO TLB between ffff8800c7ba8000 - ffff8800cbba8000
[ 2.523411] software IO TLB at phys 0xc7ba8000 - 0xcbba8000
[ 2.525798] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa0b
[ 2.525856] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa0b
[ 2.525923] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa0b
[ 2.526005] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa0b
[ 2.526133] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 2.526584] audit: initializing netlink socket (disabled)
[ 2.526654] type=2000 audit(1331809504.525:1): initialized
[ 2.548340] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.553789] VFS: Disk quotas dquot_6.5.2
[ 2.553938] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.555540] msgmni has been set to 7646
[ 2.555704] SELinux: Registering netfilter hooks
[ 2.556350] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.556435] io scheduler noop registered
[ 2.556487] io scheduler deadline registered
[ 2.556614] io scheduler cfq registered (default)
[ 2.556790] pcieport 0000:00:1c.0: setting latency timer to 64
[ 2.556823] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 2.557062] pcieport 0000:00:1c.3: setting latency timer to 64
[ 2.557091] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
[ 2.557316] pcieport 0000:00:1c.4: setting latency timer to 64
[ 2.557344] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 2.557744] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.557877] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.822117] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.899706] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.916441] Non-volatile memory driver v1.3
[ 2.916493] Linux agpgart interface v0.103
[ 2.916726] agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset
[ 2.916901] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.918491] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 2.918731] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.919187] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 2.919277] ACPI: Power Button [PWRB]
[ 2.919408] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.919494] ACPI: Power Button [PWRF]
[ 2.919981] Marking TSC unstable due to TSC halts in idle
[ 2.920071] ACPI: acpi_idle registered with cpuidle
[ 2.922442] [drm] Initialized drm 1.1.0 20060810
[ 2.922526] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.922585] i915 0000:00:02.0: setting latency timer to 64
[ 2.972646] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 2.972733] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.973729] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 2.973732] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.973789] [drm] Driver supports precise vblank timestamp query.
[ 2.973863] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.138361] fbcon: inteldrmfb (fb0) is primary device
[ 3.182175] Console: switching to colour frame buffer device 240x75
[ 3.186268] fb0: inteldrmfb frame buffer device
[ 3.186284] drm: registered panic notifier
[ 3.186352] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20110623/video-1147)
[ 3.186470] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 3.186502] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 3.186600] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.189315] brd: module loaded
[ 3.190672] loop: module loaded
[ 3.191304] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
[ 3.191396] mpt2sas version 10.100.00.00 loaded
[ 3.191548] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 3.191589] 3w-9xxx 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.191616] 3w-9xxx 0000:03:00.0: setting latency timer to 64
[ 3.395013] scsi0 : 3ware 9000 Storage Controller
[ 3.395198] 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xe2020000, IRQ: 16.
[ 3.701016] 3w-9xxx: scsi0: Firmware FE9X 4.10.00.024, BIOS BE9X 4.08.00.004, Ports: 2.
[ 3.701457] scsi 0:0:0:0: Direct-Access AMCC 9650SE-2LP DISK 4.10 PQ: 0 ANSI: 5
[ 3.711463] sd 0:0:0:0: [sda] 62478336 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 3.711569] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.711687] ata_piix 0000:00:1f.2: version 2.13
[ 3.711699] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.711727] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 3.711788] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.712224] sd 0:0:0:0: [sda] Write Protect is off
[ 3.712245] sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
[ 3.712375] scsi1 : ata_piix
[ 3.712565] scsi2 : ata_piix
[ 3.712614] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 3.712786] ata1: SATA max UDMA/133 cmd 0xf1b0 ctl 0xf1a0 bmdma 0xf170 irq 19
[ 3.712815] ata2: SATA max UDMA/133 cmd 0xf190 ctl 0xf180 bmdma 0xf178 irq 19
[ 3.712849] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.712881] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 3.712970] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 3.713556] scsi3 : ata_piix
[ 3.713764] scsi4 : ata_piix
[ 3.713923] ata3: SATA max UDMA/133 cmd 0xf150 ctl 0xf140 bmdma 0xf110 irq 19
[ 3.713951] ata4: SATA max UDMA/133 cmd 0xf130 ctl 0xf120 bmdma 0xf118 irq 19
[ 3.714381] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 3.714415] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.714504] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 3.714525] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 3.714561] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.714590] e1000e 0000:00:19.0: setting latency timer to 64
[ 3.714680] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 3.714749] sda: sda1 sda2 sda3
[ 3.716146] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.903239] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:8c:ad:cc
[ 3.903268] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.903312] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
[ 3.903342] e1000e 0000:02:00.0: Disabling ASPM L0s
[ 3.903367] e1000e 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.903403] e1000e 0000:02:00.0: setting latency timer to 64
[ 3.903566] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X
[ 3.903570] e1000e 0000:02:00.0: irq 46 for MSI/MSI-X
[ 3.903574] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X
[ 4.004997] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:1b:21:a3:78:f4
[ 4.005037] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 4.005072] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: E46981-005
[ 4.005383] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.005407] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
[ 4.005424] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.005455] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.005458] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.006814] drivers/usb/core/inode.c: creating file 'devices'
[ 4.006817] drivers/usb/core/inode.c: creating file '001'
[ 4.006889] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.008234] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 4.008238] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[ 4.008259] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.009577] ehci_hcd 0000:00:1a.7: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
[ 4.013471] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 4.013473] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 4.013484] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe2b21400
[ 4.014796] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 4.018687] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 4.024045] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.025404] usb usb1: default language 0x0409
[ 4.025409] usb usb1: udev 1, busnum 1, minor = 0
[ 4.025411] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.026713] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.028006] usb usb1: Product: EHCI Host Controller
[ 4.029294] usb usb1: Manufacturer: Linux 3.2.1-gentoo-r2 ehci_hcd
[ 4.029913] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.031876] usb usb1: SerialNumber: 0000:00:1a.7
[ 4.033251] usb usb1: usb_probe_device
[ 4.033254] usb usb1: configuration #1 chosen from 1 choice
[ 4.033259] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 4.033325] hub 1-0:1.0: usb_probe_interface
[ 4.033326] hub 1-0:1.0: usb_probe_interface - got id
[ 4.033328] hub 1-0:1.0: USB hub found
[ 4.034612] hub 1-0:1.0: 6 ports detected
[ 4.035875] hub 1-0:1.0: standalone hub
[ 4.035876] hub 1-0:1.0: no power switching (usb 1.0)
[ 4.035877] hub 1-0:1.0: individual port over-current protection
[ 4.035879] hub 1-0:1.0: power on to power good time: 20ms
[ 4.035882] hub 1-0:1.0: local power source is good
[ 4.035883] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 4.035908] drivers/usb/core/inode.c: creating file '001'
[ 4.035957] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.037240] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.037243] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.038498] drivers/usb/core/inode.c: creating file '002'
[ 4.038569] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.039813] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 4.039817] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[ 4.039840] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.040832] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.042319] ehci_hcd 0000:00:1d.7: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
[ 4.046216] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 4.046218] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 4.046229] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe2b21000
[ 4.047452] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 4.051342] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 4.057015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.058262] usb usb2: default language 0x0409
[ 4.058266] usb usb2: udev 1, busnum 2, minor = 128
[ 4.058267] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.059451] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.060637] usb usb2: Product: EHCI Host Controller
[ 4.061813] usb usb2: Manufacturer: Linux 3.2.1-gentoo-r2 ehci_hcd
[ 4.062984] usb usb2: SerialNumber: 0000:00:1d.7
[ 4.064244] usb usb2: usb_probe_device
[ 4.064246] usb usb2: configuration #1 chosen from 1 choice
[ 4.064250] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 4.064336] hub 2-0:1.0: usb_probe_interface
[ 4.064337] hub 2-0:1.0: usb_probe_interface - got id
[ 4.064339] hub 2-0:1.0: USB hub found
[ 4.065495] hub 2-0:1.0: 6 ports detected
[ 4.066636] hub 2-0:1.0: standalone hub
[ 4.066637] hub 2-0:1.0: no power switching (usb 1.0)
[ 4.066638] hub 2-0:1.0: individual port over-current protection
[ 4.066639] hub 2-0:1.0: power on to power good time: 20ms
[ 4.066642] hub 2-0:1.0: local power source is good
[ 4.066644] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 4.066668] drivers/usb/core/inode.c: creating file '001'
[ 4.066769] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.067923] ohci_hcd: block sizes: ed 80 td 96
[ 4.068010] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.069191] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.070355] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.070362] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.071513] drivers/usb/core/inode.c: creating file '003'
[ 4.071606] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.072757] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 4.073894] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.073896] uhci_hcd 0000:00:1a.0: Performing full reset
[ 4.073912] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 4.073918] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0
[ 4.075067] usb usb3: default language 0x0409
[ 4.075071] usb usb3: udev 1, busnum 3, minor = 256
[ 4.075073] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.076190] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.077307] usb usb3: Product: UHCI Host Controller
[ 4.078416] usb usb3: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd
[ 4.079521] usb usb3: SerialNumber: 0000:00:1a.0
[ 4.080720] usb usb3: usb_probe_device
[ 4.080722] usb usb3: configuration #1 chosen from 1 choice
[ 4.080726] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 4.080810] hub 3-0:1.0: usb_probe_interface
[ 4.080811] hub 3-0:1.0: usb_probe_interface - got id
[ 4.080813] hub 3-0:1.0: USB hub found
[ 4.081911] hub 3-0:1.0: 2 ports detected
[ 4.083000] hub 3-0:1.0: standalone hub
[ 4.083013] hub 3-0:1.0: no power switching (usb 1.0)
[ 4.083014] hub 3-0:1.0: individual port over-current protection
[ 4.083015] hub 3-0:1.0: power on to power good time: 2ms
[ 4.083018] hub 3-0:1.0: local power source is good
[ 4.083019] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 4.083031] drivers/usb/core/inode.c: creating file '001'
[ 4.083053] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
[ 4.083070] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.084170] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.084172] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.085286] drivers/usb/core/inode.c: creating file '004'
[ 4.085384] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.086491] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 4.087588] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.087590] uhci_hcd 0000:00:1a.1: Performing full reset
[ 4.087606] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 4.087618] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0a0
[ 4.088733] usb usb4: default language 0x0409
[ 4.088737] usb usb4: udev 1, busnum 4, minor = 384
[ 4.088739] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.089841] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.090943] usb usb4: Product: UHCI Host Controller
[ 4.092041] usb usb4: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd
[ 4.093159] usb usb4: SerialNumber: 0000:00:1a.1
[ 4.094359] usb usb4: usb_probe_device
[ 4.094361] usb usb4: configuration #1 chosen from 1 choice
[ 4.094365] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 4.094452] hub 4-0:1.0: usb_probe_interface
[ 4.094453] hub 4-0:1.0: usb_probe_interface - got id
[ 4.094455] hub 4-0:1.0: USB hub found
[ 4.095561] hub 4-0:1.0: 2 ports detected
[ 4.096659] hub 4-0:1.0: standalone hub
[ 4.096660] hub 4-0:1.0: no power switching (usb 1.0)
[ 4.096661] hub 4-0:1.0: individual port over-current protection
[ 4.096663] hub 4-0:1.0: power on to power good time: 2ms
[ 4.096665] hub 4-0:1.0: local power source is good
[ 4.096667] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 4.096676] drivers/usb/core/inode.c: creating file '001'
[ 4.096697] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
[ 4.096710] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.097826] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 4.097834] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 4.098939] drivers/usb/core/inode.c: creating file '005'
[ 4.099032] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 4.100150] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 4.101260] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.101262] uhci_hcd 0000:00:1a.2: Performing full reset
[ 4.101278] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 4.101282] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f080
[ 4.102395] usb usb5: default language 0x0409
[ 4.102399] usb usb5: udev 1, busnum 5, minor = 512
[ 4.102400] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.103498] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.104591] usb usb5: Product: UHCI Host Controller
[ 4.105687] usb usb5: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd
[ 4.106785] usb usb5: SerialNumber: 0000:00:1a.2
[ 4.107977] usb usb5: usb_probe_device
[ 4.107978] usb usb5: configuration #1 chosen from 1 choice
[ 4.107982] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 4.108073] hub 5-0:1.0: usb_probe_interface
[ 4.108075] hub 5-0:1.0: usb_probe_interface - got id
[ 4.108076] hub 5-0:1.0: USB hub found
[ 4.109172] hub 5-0:1.0: 2 ports detected
[ 4.110254] hub 5-0:1.0: standalone hub
[ 4.110256] hub 5-0:1.0: no power switching (usb 1.0)
[ 4.110257] hub 5-0:1.0: individual port over-current protection
[ 4.110258] hub 5-0:1.0: power on to power good time: 2ms
[ 4.110261] hub 5-0:1.0: local power source is good
[ 4.110262] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 4.110272] drivers/usb/core/inode.c: creating file '001'
[ 4.110292] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
[ 4.110305] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.111401] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.111404] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.112500] drivers/usb/core/inode.c: creating file '006'
[ 4.112586] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 4.113692] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 4.114786] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.114788] uhci_hcd 0000:00:1d.0: Performing full reset
[ 4.114801] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 4.114804] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060
[ 4.115910] usb usb6: default language 0x0409
[ 4.115914] usb usb6: udev 1, busnum 6, minor = 640
[ 4.115915] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.117015] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.118108] usb usb6: Product: UHCI Host Controller
[ 4.119197] usb usb6: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd
[ 4.120295] usb usb6: SerialNumber: 0000:00:1d.0
[ 4.121495] usb usb6: usb_probe_device
[ 4.121497] usb usb6: configuration #1 chosen from 1 choice
[ 4.121501] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 4.121586] hub 6-0:1.0: usb_probe_interface
[ 4.121588] hub 6-0:1.0: usb_probe_interface - got id
[ 4.121589] hub 6-0:1.0: USB hub found
[ 4.122683] hub 6-0:1.0: 2 ports detected
[ 4.123763] hub 6-0:1.0: standalone hub
[ 4.123764] hub 6-0:1.0: no power switching (usb 1.0)
[ 4.123766] hub 6-0:1.0: individual port over-current protection
[ 4.123767] hub 6-0:1.0: power on to power good time: 2ms
[ 4.123770] hub 6-0:1.0: local power source is good
[ 4.123771] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 4.123782] drivers/usb/core/inode.c: creating file '001'
[ 4.123805] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 4.123816] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.124914] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.124917] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.126012] drivers/usb/core/inode.c: creating file '007'
[ 4.126107] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 4.127205] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 4.128296] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.128298] uhci_hcd 0000:00:1d.1: Performing full reset
[ 4.128310] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 4.128315] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f040
[ 4.129434] usb usb7: default language 0x0409
[ 4.129438] usb usb7: udev 1, busnum 7, minor = 768
[ 4.129439] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.130536] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.131636] usb usb7: Product: UHCI Host Controller
[ 4.132722] usb usb7: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd
[ 4.133815] usb usb7: SerialNumber: 0000:00:1d.1
[ 4.135028] ehci_hcd 0000:00:1a.7: GetStatus port:5 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 4.135031] hub 1-0:1.0: port 5: status 0501 change 0001
[ 4.135040] usb usb7: usb_probe_device
[ 4.135042] usb usb7: configuration #1 chosen from 1 choice
[ 4.135046] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 4.135130] hub 7-0:1.0: usb_probe_interface
[ 4.135132] hub 7-0:1.0: usb_probe_interface - got id
[ 4.135133] hub 7-0:1.0: USB hub found
[ 4.136216] hub 7-0:1.0: 2 ports detected
[ 4.137299] hub 7-0:1.0: standalone hub
[ 4.137301] hub 7-0:1.0: no power switching (usb 1.0)
[ 4.137302] hub 7-0:1.0: individual port over-current protection
[ 4.137303] hub 7-0:1.0: power on to power good time: 2ms
[ 4.137306] hub 7-0:1.0: local power source is good
[ 4.137307] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 4.137319] drivers/usb/core/inode.c: creating file '001'
[ 4.137342] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[ 4.137353] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.138456] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.138463] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.139554] drivers/usb/core/inode.c: creating file '008'
[ 4.139640] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 4.140734] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 4.141819] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 4.141820] uhci_hcd 0000:00:1d.2: Performing full reset
[ 4.141833] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 4.141836] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f020
[ 4.142948] usb usb8: default language 0x0409
[ 4.142952] usb usb8: udev 1, busnum 8, minor = 896
[ 4.142954] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.144043] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.145136] usb usb8: Product: UHCI Host Controller
[ 4.146231] usb usb8: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd
[ 4.147329] usb usb8: SerialNumber: 0000:00:1d.2
[ 4.148517] usb usb8: usb_probe_device
[ 4.148518] usb usb8: configuration #1 chosen from 1 choice
[ 4.148522] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 4.148606] hub 8-0:1.0: usb_probe_interface
[ 4.148608] hub 8-0:1.0: usb_probe_interface - got id
[ 4.148609] hub 8-0:1.0: USB hub found
[ 4.149696] hub 8-0:1.0: 2 ports detected
[ 4.150780] hub 8-0:1.0: standalone hub
[ 4.150782] hub 8-0:1.0: no power switching (usb 1.0)
[ 4.150783] hub 8-0:1.0: individual port over-current protection
[ 4.150784] hub 8-0:1.0: power on to power good time: 2ms
[ 4.150787] hub 8-0:1.0: local power source is good
[ 4.150788] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 4.150799] drivers/usb/core/inode.c: creating file '001'
[ 4.150820] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[ 4.150985] usbcore: registered new interface driver usblp
[ 4.152070] Initializing USB Mass Storage driver...
[ 4.153254] usbcore: registered new interface driver usb-storage
[ 4.154348] USB Mass Storage support registered.
[ 4.155535] usbcore: registered new interface driver libusual
[ 4.156956] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 4.162766] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.163867] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.165165] mousedev: PS/2 mouse device common for all mice
[ 4.166036] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 4.166709] rtc_cmos 00:05: RTC can wake from S4
[ 4.167955] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 4.169088] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 4.170281] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.172441] cpuidle: using governor ladder
[ 4.175329] cpuidle: using governor menu
[ 4.176451] EFI Variables Facility v0.08 2004-May-17
[ 4.179121] usbcore: registered new interface driver usbhid
[ 4.180220] usbhid: USB HID core driver
[ 4.181580] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.182702] TCP cubic registered
[ 4.183058] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4.183794] Initializing XFRM netlink socket
[ 4.185254] NET: Registered protocol family 10
[ 4.186795] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.187903] IPv6 over IPv4 tunneling driver
[ 4.189426] NET: Registered protocol family 17
[ 4.190517] Registering the dns_resolver key type
[ 4.191834] PM: Hibernation image not present or could not be loaded.
[ 4.191843] registered taskstats version 1
[ 4.193233] Magic number: 4:785:74
[ 4.194364] console [netcon0] enabled
[ 4.195433] netconsole: network logging started
[ 4.196058] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4.210050] uhci_hcd 0000:00:1a.2: port 1 portsc 0082,00
[ 4.223076] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4.235074] hub 1-0:1.0: state 7 ports 6 chg 0020 evt 0000
[ 4.235082] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
[ 4.286339] ehci_hcd 0000:00:1a.7: port 5 high speed
[ 4.286342] ehci_hcd 0000:00:1a.7: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 4.337050] usb 1-5: new high-speed USB device number 2 using ehci_hcd
[ 4.389214] ehci_hcd 0000:00:1a.7: port 5 high speed
[ 4.389217] ehci_hcd 0000:00:1a.7: GetStatus port:5 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 4.452366] usb 1-5: udev 2, busnum 1, minor = 1
[ 4.452368] usb 1-5: New USB device found, idVendor=0424, idProduct=2504
[ 4.453479] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.454667] usb 1-5: usb_probe_device
[ 4.454669] usb 1-5: configuration #1 chosen from 1 choice
[ 4.454738] usb 1-5: adding 1-5:1.0 (config #1, interface 0)
[ 4.454825] hub 1-5:1.0: usb_probe_interface
[ 4.454827] hub 1-5:1.0: usb_probe_interface - got id
[ 4.454829] hub 1-5:1.0: USB hub found
[ 4.455993] hub 1-5:1.0: 4 ports detected
[ 4.457083] hub 1-5:1.0: standalone hub
[ 4.457084] hub 1-5:1.0: ganged power switching
[ 4.457086] hub 1-5:1.0: global over-current protection
[ 4.457252] hub 1-5:1.0: TT per port
[ 4.457254] hub 1-5:1.0: TT requires at most 8 FS bit times (666 ns)
[ 4.457256] hub 1-5:1.0: power on to power good time: 100ms
[ 4.457491] hub 1-5:1.0: local power source is good
[ 4.457493] hub 1-5:1.0: no over-current condition exists
[ 4.457494] hub 1-5:1.0: enabling power on all ports
[ 4.457992] drivers/usb/core/inode.c: creating file '002'
[ 4.458019] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4.458021] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4.458023] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4.475071] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.476169] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 4.479097] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.480195] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.481428] ata2.00: ATA-7: INTEL SSDSA2M160G2GC, 2CV102HD, max UDMA/133
[ 4.482534] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.486260] ata2.00: configured for UDMA/133
[ 4.487594] ata1.00: ATA-7: INTEL SSDSA2M160G2GC, 2CV102HD, max UDMA/133
[ 4.488697] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.489784] ata1.01: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB00, max UDMA/100
[ 4.494283] ata1.00: configured for UDMA/133
[ 4.501184] ata1.01: configured for UDMA/100
[ 4.502636] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSA2M160 2CV1 PQ: 0 ANSI: 5
[ 4.504014] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 4.504090] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.506286] scsi 1:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB00 PQ: 0 ANSI: 5
[ 4.506308] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.506310] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.506323] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.509727] sdb: sdb1
[ 4.514116] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.514265] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.516429] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.517797] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 4.517964] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 4.519286] scsi 2:0:0:0: Direct-Access ATA INTEL SSDSA2M160 2CV1 PQ: 0 ANSI: 5
[ 4.520794] sd 2:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 4.520856] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 4.523256] sd 2:0:0:0: [sdc] Write Protect is off
[ 4.524429] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.524443] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.526154] sdc: sdc1
[ 4.527678] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 4.557122] hub 1-5:1.0: port 1: status 0301 change 0001
[ 4.557370] hub 1-5:1.0: port 2: status 0301 change 0001
[ 4.557622] hub 1-5:1.0: port 3: status 0101 change 0001
[ 4.657035] usb 1-5: link qh256-0001/ffff8801265a4600 start 1 [1/0 us]
[ 4.657052] hub 1-5:1.0: state 7 ports 4 chg 000e evt 0000
[ 4.657122] hub 1-5:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
[ 4.668122] hub 1-5:1.0: port 1 not reset yet, waiting 10ms
[ 4.730121] usb 1-5.1: new low-speed USB device number 3 using ehci_hcd
[ 4.744116] hub 1-5:1.0: port 1 not reset yet, waiting 10ms
[ 4.788298] md: Waiting for all devices to be available before autodetect
[ 4.789500] md: If you don't use raid, use raid=noautodetect
[ 4.790898] md: Autodetecting RAID arrays.
[ 4.792103] md: Scanned 0 and added 0 devices.
[ 4.793300] md: autorun ...
[ 4.794489] md: ... autorun DONE.
[ 4.804086] kjournald starting. Commit interval 5 seconds
[ 4.804111] EXT3-fs (sda3): mounted filesystem with writeback data mode
[ 4.804120] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
[ 4.808465] Freeing unused kernel memory: 640k freed
[ 4.809792] Write protecting the kernel read-only data: 10240k
[ 4.814637] Freeing unused kernel memory: 1488k freed
[ 4.816294] Freeing unused kernel memory: 44k freed
[ 4.831360] usb 1-5.1: skipped 1 descriptor after interface
[ 4.831362] usb 1-5.1: skipped 1 descriptor after interface
[ 4.832104] usb 1-5.1: default language 0x0409
[ 4.842113] usb 1-5.1: udev 3, busnum 1, minor = 2
[ 4.842115] usb 1-5.1: New USB device found, idVendor=045e, idProduct=00b4
[ 4.843325] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.843327] usb 1-5.1: Product: Microsoft\xffffffc2\xffffffae Digital Media Keyboard
[ 4.843330] usb 1-5.1: Manufacturer: Microsoft
[ 4.843430] usb 1-5.1: usb_probe_device
[ 4.843432] usb 1-5.1: configuration #1 chosen from 1 choice
[ 4.843993] usb 1-5.1: adding 1-5.1:1.0 (config #1, interface 0)
[ 4.844071] usbhid 1-5.1:1.0: usb_probe_interface
[ 4.844072] usbhid 1-5.1:1.0: usb_probe_interface - got id
[ 4.852475] input: Microsoft Microsoft\xffffffc2\xffffffae Digital Media Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input3
[ 4.853752] usb 1-5.1: link qh8-0601/ffff880125a32f00 start 2 [1/2 us]
[ 4.853888] generic-usb 0003:045E:00B4.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae Digital Media Keyboard] on usb-0000:00:1a.7-5.1/input0
[ 4.855186] usb 1-5.1: adding 1-5.1:1.1 (config #1, interface 1)
[ 4.855246] usbhid 1-5.1:1.1: usb_probe_interface
[ 4.855248] usbhid 1-5.1:1.1: usb_probe_interface - got id
[ 4.869272] input: Microsoft Microsoft\xffffffc2\xffffffae Digital Media Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.1/input/input4
[ 4.870589] usb 1-5.1: link qh8-0601/ffff880125a32b80 start 3 [1/2 us]
[ 4.870719] generic-usb 0003:045E:00B4.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae Digital Media Keyboard] on usb-0000:00:1a.7-5.1/input1
[ 4.872051] drivers/usb/core/inode.c: creating file '003'
[ 4.872235] hub 1-5:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[ 4.883125] hub 1-5:1.0: port 2 not reset yet, waiting 10ms
[ 4.925585] loadkeys used greatest stack depth: 3808 bytes left
[ 4.926994] init-early.sh used greatest stack depth: 3520 bytes left
[ 4.945128] usb 1-5.2: new low-speed USB device number 4 using ehci_hcd
[ 4.959110] hub 1-5:1.0: port 2 not reset yet, waiting 10ms
[ 5.039232] usb 1-5.2: skipped 1 descriptor after interface
[ 5.040980] usb 1-5.2: default language 0x0409
[ 5.048994] usb 1-5.2: udev 4, busnum 1, minor = 3
[ 5.048997] usb 1-5.2: New USB device found, idVendor=045e, idProduct=0095
[ 5.050365] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.051723] usb 1-5.2: Product: Microsoft IntelliMouse\xffffffc2\xffffffae Explorer
[ 5.053085] usb 1-5.2: Manufacturer: Microsoft
[ 5.054554] usb 1-5.2: usb_probe_device
[ 5.054557] usb 1-5.2: configuration #1 chosen from 1 choice
[ 5.055748] usb 1-5.2: adding 1-5.2:1.0 (config #1, interface 0)
[ 5.055831] usbhid 1-5.2:1.0: usb_probe_interface
[ 5.055832] usbhid 1-5.2:1.0: usb_probe_interface - got id
[ 5.068351] input: Microsoft Microsoft IntelliMouse\xffffffc2\xffffffae Explorer as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input5
[ 5.069984] generic-usb 0003:045E:0095.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft IntelliMouse\xffffffc2\xffffffae Explorer] on usb-0000:00:1a.7-5.2/input0
[ 5.071431] drivers/usb/core/inode.c: creating file '004'
[ 5.071611] hub 1-5:1.0: port 3, status 0101, change 0000, 12 Mb/s
[ 5.082122] hub 1-5:1.0: port 3 not reset yet, waiting 10ms
[ 5.144113] usb 1-5.3: new high-speed USB device number 5 using ehci_hcd
[ 5.157116] hub 1-5:1.0: port 3 not reset yet, waiting 10ms
[ 5.204037] usb usb3: suspend_rh (auto-stop)
[ 5.204059] usb usb4: suspend_rh (auto-stop)
[ 5.204078] usb usb6: suspend_rh (auto-stop)
[ 5.204098] usb usb7: suspend_rh (auto-stop)
[ 5.204117] usb usb8: suspend_rh (auto-stop)
[ 5.231372] usb 1-5.3: udev 5, busnum 1, minor = 4
[ 5.231374] usb 1-5.3: New USB device found, idVendor=0424, idProduct=2504
[ 5.231376] usb 1-5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.231421] usb 1-5.3: usb_probe_device
[ 5.231424] usb 1-5.3: configuration #1 chosen from 1 choice
[ 5.231503] usb 1-5.3: adding 1-5.3:1.0 (config #1, interface 0)
[ 5.231525] hub 1-5.3:1.0: usb_probe_interface
[ 5.231526] hub 1-5.3:1.0: usb_probe_interface - got id
[ 5.231528] hub 1-5.3:1.0: USB hub found
[ 5.231608] hub 1-5.3:1.0: 4 ports detected
[ 5.231610] hub 1-5.3:1.0: standalone hub
[ 5.231611] hub 1-5.3:1.0: ganged power switching
[ 5.231613] hub 1-5.3:1.0: global over-current protection
[ 5.231753] hub 1-5.3:1.0: TT per port
[ 5.231755] hub 1-5.3:1.0: TT requires at most 8 FS bit times (666 ns)
[ 5.231757] hub 1-5.3:1.0: power on to power good time: 100ms
[ 5.231983] hub 1-5.3:1.0: local power source is good
[ 5.231986] hub 1-5.3:1.0: no over-current condition exists
[ 5.231988] hub 1-5.3:1.0: enabling power on all ports
[ 5.232481] drivers/usb/core/inode.c: creating file '005'
[ 5.232499] hub 1-5:1.0: state 7 ports 4 chg 0000 evt 0002
[ 5.243910] udevd[1134]: starting version 171
[ 5.332510] hub 1-5.3:1.0: port 4: status 0301 change 0001
[ 5.432043] usb 1-5.3: link qh256-0001/ffff8801238d9580 start 4 [1/0 us]
[ 5.432051] hub 1-5.3:1.0: state 7 ports 4 chg 0010 evt 0000
[ 5.432122] hub 1-5.3:1.0: port 4, status 0301, change 0000, 1.5 Mb/s
[ 5.443115] hub 1-5.3:1.0: port 4 not reset yet, waiting 10ms
[ 5.454060] usb usb5: suspend_rh (auto-stop)
[ 5.505110] usb 1-5.3.4: new low-speed USB device number 6 using ehci_hcd
[ 5.517119] hub 1-5.3:1.0: port 4 not reset yet, waiting 10ms
[ 5.579113] usb 1-5.3.4: device descriptor read/64, error -32
[ 5.598407] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 5.692110] hub 1-5.3:1.0: port 4 not reset yet, waiting 10ms
[ 5.754107] usb 1-5.3.4: device descriptor read/64, error -32
[ 5.802070] EXT3-fs (sda3): using internal journal
[ 5.841777] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.866108] hub 1-5.3:1.0: port 4 not reset yet, waiting 10ms
[ 5.928120] usb 1-5.3.4: new low-speed USB device number 7 using ehci_hcd
[ 5.942121] hub 1-5.3:1.0: port 4 not reset yet, waiting 10ms
[ 6.004119] usb 1-5.3.4: device descriptor read/64, error -32
[ 6.117105] hub 1-5.3:1.0: port 4 not reset yet, waiting 10ms
[ 6.179109] usb 1-5.3.4: device descriptor read/64, error -32
[ 6.211414] Adding 4095996k swap on /dev/sda2. Priority:-1 extents:1 across:4095996k
[ 6.292115] hub 1-5.3:1.0: port 4 not reset yet, waiting 10ms
[ 6.354121] usb 1-5.3.4: new low-speed USB device number 8 using ehci_hcd
[ 6.390211] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 6.441076] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 6.441469] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.756047] usb 1-5.3.4: device not accepting address 8, error -32
[ 6.767122] hub 1-5.3:1.0: port 4 not reset yet, waiting 10ms
[ 6.829126] usb 1-5.3.4: new low-speed USB device number 9 using ehci_hcd
[ 7.231032] usb 1-5.3.4: device not accepting address 9, error -32
[ 7.231133] hub 1-5.3:1.0: unable to enumerate USB device on port 4
[ 7.231246] hub 1-5.3:1.0: state 7 ports 4 chg 0000 evt 0010
[ 8.773908] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 8.774280] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.362040] eth0: no IPv6 routers present
[ 36.349008] usb 1-5.1: unlink qh8-0601/ffff880125a32f00 start 2 [1/2 us]
[ 36.350001] usb 1-5.1: unlink qh8-0601/ffff880125a32b80 start 3 [1/2 us]
[ 36.361028] ehci_hcd 0000:00:1a.7: reused qh ffff880125a32f00 schedule
[ 36.361031] usb 1-5.1: link qh8-0601/ffff880125a32f00 start 2 [1/2 us]
[ 36.362029] ehci_hcd 0000:00:1a.7: reused qh ffff880125a32b80 schedule
[ 36.362031] usb 1-5.1: link qh8-0601/ffff880125a32b80 start 3 [1/2 us]
[ 36.380997] usb 1-5.1: unlink qh8-0601/ffff880125a32f00 start 2 [1/2 us]
[ 36.381998] usb 1-5.1: unlink qh8-0601/ffff880125a32b80 start 3 [1/2 us]
[ 36.406038] ehci_hcd 0000:00:1a.7: reused qh ffff880125a32f00 schedule
[ 36.406040] usb 1-5.1: link qh8-0601/ffff880125a32f00 start 2 [1/2 us]
[ 36.407042] ehci_hcd 0000:00:1a.7: reused qh ffff880125a32b80 schedule
[ 36.407044] usb 1-5.1: link qh8-0601/ffff880125a32b80 start 3 [1/2 us]
[ 36.428993] usb 1-5.1: unlink qh8-0601/ffff880125a32f00 start 2 [1/2 us]
[ 36.430000] usb 1-5.1: unlink qh8-0601/ffff880125a32b80 start 3 [1/2 us]
[ 36.480046] ehci_hcd 0000:00:1a.7: reused qh ffff880125a32f00 schedule
[ 36.480048] usb 1-5.1: link qh8-0601/ffff880125a32f00 start 2 [1/2 us]
[ 36.481033] ehci_hcd 0000:00:1a.7: reused qh ffff880125a32b80 schedule
[ 36.481036] usb 1-5.1: link qh8-0601/ffff880125a32b80 start 3 [1/2 us]
[ 36.501003] usb 1-5.1: unlink qh8-0601/ffff880125a32f00 start 2 [1/2 us]
[ 36.501998] usb 1-5.1: unlink qh8-0601/ffff880125a32b80 start 3 [1/2 us]
[ 36.531759] hub 1-5:1.0: state 7 ports 4 chg 0000 evt 001e
[ 36.532001] hub 1-5:1.0: port 1, status 0100, change 0001, 12 Mb/s
[ 36.532010] usb 1-5.1: USB disconnect, device number 3
[ 36.532012] usb 1-5.1: unregistering device
[ 36.532014] usb 1-5.1: unregistering interface 1-5.1:1.0
[ 36.573123] usb 1-5.1: unregistering interface 1-5.1:1.1
[ 36.621132] usb 1-5.1: usb_disable_device nuking all URBs
[ 36.741124] hub 1-5:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
[ 36.741376] hub 1-5:1.0: port 2, status 0100, change 0001, 12 Mb/s
[ 36.741378] usb 1-5.2: USB disconnect, device number 4
[ 36.741380] usb 1-5.2: unregistering device
[ 36.741381] usb 1-5.2: unregistering interface 1-5.2:1.0
[ 36.774106] usb 1-5.2: usb_disable_device nuking all URBs
[ 36.878129] hub 1-5:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
[ 36.878374] hub 1-5:1.0: port 3, status 0100, change 0001, 12 Mb/s
[ 36.878377] usb 1-5.3: USB disconnect, device number 5
[ 36.878379] usb 1-5.3: unregistering device
[ 36.878381] usb 1-5.3: unregistering interface 1-5.3:1.0
[ 36.878408] usb 1-5.3: unlink qh256-0001/ffff8801238d9580 start 4 [1/0 us]
[ 36.878466] ehci_hcd 0000:00:1a.7: shutdown urb ffff880125b73a80 ep1in-intr
[ 36.878482] usb 1-5.3: usb_disable_device nuking all URBs
[ 36.982130] hub 1-5:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
[ 36.982377] hub 1-5:1.0: port 4, status 0301, change 0001, 1.5 Mb/s
[ 37.086129] hub 1-5:1.0: debounce: port 4: total 100ms stable 100ms status 0x301
[ 37.097125] hub 1-5:1.0: port 4 not reset yet, waiting 10ms
[ 37.159126] usb 1-5.4: new low-speed USB device number 10 using ehci_hcd
[ 37.172125] hub 1-5:1.0: port 4 not reset yet, waiting 10ms
[ 37.256012] usb 1-5.4: skipped 1 descriptor after interface
[ 37.256014] usb 1-5.4: skipped 1 descriptor after interface
[ 37.256756] usb 1-5.4: default language 0x0409
[ 37.258993] usb 1-5.4: udev 10, busnum 1, minor = 9
[ 37.258995] usb 1-5.4: New USB device found, idVendor=06f2, idProduct=0011
[ 37.258997] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 37.258999] usb 1-5.4: Product: 2
[ 37.259007] usb 1-5.4: Manufacturer: 1
[ 37.259009] usb 1-5.4: SerialNumber: 3
[ 37.259048] usb 1-5.4: usb_probe_device
[ 37.259051] usb 1-5.4: configuration #1 chosen from 1 choice
[ 37.259380] usb 1-5.4: adding 1-5.4:1.0 (config #1, interface 0)
[ 37.259408] usbhid 1-5.4:1.0: usb_probe_interface
[ 37.259410] usbhid 1-5.4:1.0: usb_probe_interface - got id
[ 37.267697] input: 1 2 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.4/1-5.4:1.0/input/input6
[ 37.267714] usb 1-5.4: link qh2-0601/ffff8801259f8c00 start 1 [1/2 us]
[ 37.267756] generic-usb 0003:06F2:0011.0004: input,hidraw0: USB HID v1.10 Keyboard [1 2] on usb-0000:00:1a.7-5.4/input0
[ 37.267767] usb 1-5.4: adding 1-5.4:1.1 (config #1, interface 1)
[ 37.267794] usbhid 1-5.4:1.1: usb_probe_interface
[ 37.267796] usbhid 1-5.4:1.1: usb_probe_interface - got id
[ 37.270411] input: 1 2 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.4/1-5.4:1.1/input/input7
[ 37.270453] generic-usb 0003:06F2:0011.0005: input,hidraw1: USB HID v1.10 Mouse [1 2] on usb-0000:00:1a.7-5.4/input1
[ 37.270466] drivers/usb/core/inode.c: creating file '010'
[ 37.270480] hub 1-5:1.0: state 7 ports 4 chg 0000 evt 0000