PROMLIB: Sun IEEE Boot Prom 3.25.3 2000/06/29 14:12
Linux version 2.2.14-5.0 (root@lisa.devel.redhat.com) (gcc version egcs-2.92.11 19980921 (gcc2 ss-980609 experimental)) #1 Tue Mar 7 21:50:41 EST 2000
ARCH: SUN4U
Ethernet address: 08:00:20:f8:b4:88
Console: colour dummy device 80x25
Calibrating delay loop... 799.54 BogoMIPS
Memory: 125936k available (1448k kernel code, 2368k data, 128k init) [fffff80000000000,fffff80017f40000]
Dentry hash table entries: 16384 (order 5, 256k)
Buffer cache hash table entries: 131072 (order 7, 1024k)
Page cache hash table entries: 16384 (order 4, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
POSIX conformance testing by UNIFIX
PCI: Probing for controllers.
PCI: Found SABRE, main regs at fffff9fe00000000 CTRL[0000000000000000]
SABRE: PCI config space at fffff9fe01000000
SABRE: DVMA at c0000000 [20000000]
PCI: Probing PCI hardware
ebus0: fffff9fff0000000[1000000] fffff9fff1000000[800000]
power: Control reg at fffff9fff1724000 ... powerd running.
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
atyfb: 3D RAGE PRO (PQFP, PCI) [0x4750 rev 0x7c] 4M SGRAM, 14.31818 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK
Console: switching to colour frame buffer device 160x64
fb0: ATY Mach64 frame buffer device on PCI
PCIO serial driver version 1.18.2.5
su(mouse) at 0xfffff9fff13062f8 (irq = 4,7ea) is a 16550A
su(kbd) at 0xfffff9fff13083f8 (irq = 9,7e9) is a 16550A
Sun TYPE 5 keyboard detected without keyclick
SAB82532 serial driver version 1.30.2.2
ttyS00 at 0xfffff9fff1400000 (irq = 12,7eb) is a SAB82532 V3.2
ttyS01 at 0xfffff9fff1400040 (irq = 12,7eb) is a SAB82532 V3.2
pty: 256 Unix98 ptys configured
Sun Mouse-Systems mouse driver version 1.00
RAM disk driver initialized: 16 RAM disks of 4096K size
CMD646: IDE controller on PCI bus 01 dev 18
CMD646: 100% native mode on irq 3,7e0
ide0: BM-DMA at 0xfffff9fe02c00020-0xfffff9fe02c00027, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xfffff9fe02c00028-0xfffff9fe02c0002f, BIOS settings: hdc:pio, hdd:pio
hda: IBM-DTTA-371440, ATA DISK drive
hdc: CRD-8322B, ATAPI CDROM drive
ide0 at 0x2c00000-0x2c00007,0x2c0000a on irq 3,7e0
ide1 at 0x2c00010-0x2c00017,0x2c0001a on irq 3,7e0 (shared with ide0)
CMD646: MDMA enable [SELECT SETXFER CMND wait STAT(50) SETFEATURE wait STAT(d0) STAT(d0) STAT(d0) STAT(50) DMA_CAP DONE]
hda: IBM-DTTA-371440, 13783MB w/462kB Cache, CHS=28005/16/63, (U)DMA
hdc: ATAPI 32X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: using high-speed VIS checksum routine
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4104
Partition check:
hda: hda1 hda2 hda3
RAMDISK: Compressed image found at block 0
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem).
sym53c8xx: at PCI bus 2, device 3, function 0
sym53c8xx: PCI_CACHE_LINE_SIZE set to 16 (fix-up).
sym53c8xx: setting PCI_LATENCY_TIMER to 80 (fix-up).
sym53c8xx: 53c875 detected
ncr53c875-0: rev=0x04, base=0x1ff00002000, io_port=0xfffff9fe02000400, irq=0x626440
sym53c875-0: NCR clock is 40037KHz, 40218KHz
sym53c875-0: ID 7, Fast-20, Parity Checking
sym53c875-0: on-chip RAM at 0x1ff00004000
sym53c875-0: restart (scsi reset).
sym53c875-0: Downloading SCSI SCRIPTS.
scsi0 : sym53c8xx - version 1.3g
PCI bus 02 device 18
scsi : 1 host.
Vendor: SEAGATE Model: ST32155W Rev: 0528
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
sym53c875-0-<0,0>: tagged command queue depth set to 4
sym53c875-0-<0,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 15)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 4197405 [2049 MB] [2.0 GB]
sda: sda1 sda2 sda3
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Adding Swap: 128752k swap-space (priority -1)
audio0: cs4231a(eb2) at fffff9fff1200000 irq 13,7e3
sunhme.c:v1.10 27/Jan/99 David S. Miller (davem@caipfs.rutgers.edu)
eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:f8:b4:88
eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex.