Linux version 2.2.19-7.0.1smp (root@porky.devel.redhat.com) (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 SMP Tue Apr 10 01:46:39
EDT 2001
BIOS-provided physical RAM map:
BIOS-e820: 0009e000 @ 00000000 (usable)
BIOS-e820: 1fefe000 @ 00100000 (usable)
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: DELL Product ID: POWEREDGE A6 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
I/O APIC #3 Version 17 at 0xFEC01000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
mapped IOAPIC to ffffc000 (fec01000)
Detected 728494 kHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1454.89 BogoMIPS
Memory: 516496k/524280k available (1128k kernel code, 424k reserved, 5664k
data, 84k init, 0k bigmem)
Dentry hash table entries: 65536 (order 7, 512k)
Buffer cache hash table entries: 524288 (order 9, 2048k)
Page cache hash table entries: 131072 (order 7, 512k)
VFS: Diskquotas version dquot_6.4.0 initialized
256K L2 cache (8 way)
CPU: L2 Cache: 256K
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
256K L2 cache (8 way)
CPU: L2 Cache: 256K
per-CPU timeslice cutoff: 50.00 usecs.
CPU0: Intel Pentium III (Coppermine) stepping 03
calibrating APIC timer ...
..... CPU clock speed is 728.4775 MHz.
..... system bus clock speed is 132.4504 MHz.
Booting processor 1 eip 2000
Calibrating delay loop... 1454.89 BogoMIPS
Intel machine check reporting enabled on CPU#1.
256K L2 cache (8 way)
CPU: L2 Cache: 256K
OK.
CPU1: Intel Pentium III (Coppermine) stepping 06
Total of 2 processors activated (2909.79 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
...changing IO-APIC physical APIC ID to 2
...changing IO-APIC physical APIC ID to 3
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-2, 2-5, 2-10, 2-11, 2-13, 3-3, 3-8, 3-9, 3-10,
3-11, 3-12, 3-13 not connected.
...trying to set up timer as ExtINT... .. (found pin 0) ... works.
number of MP IRQ sources: 28.
number of IO-APIC #2 registers: 16.
number of IO-APIC #3 registers: 16.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 0 0 0 0 0 0 7 51
01 000 00 0 0 0 0 0 1 1 59
02 000 00 1 0 0 0 0 0 0 00
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 1 0 0 0 0 0 0 00
06 000 00 0 0 0 0 0 1 1 71
07 000 00 0 0 0 0 0 1 1 79
08 000 00 0 0 0 0 0 1 1 81
09 000 00 0 0 0 0 0 1 1 89
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 0 0 0 0 0 1 1 91
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 99
0f 000 00 0 0 0 0 0 1 1 A1
IO APIC #3......
.... register #00: 03000000
....... : physical APIC id: 03
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : IO APIC version: 0011
.... register #02: 0E000000
....... : arbitration: 0E
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 0FF 0F 1 1 0 1 0 1 1 A9
01 0FF 0F 1 1 0 1 0 1 1 B1
02 0FF 0F 1 1 0 1 0 1 1 B9
03 000 00 1 0 0 0 0 0 0 00
04 0FF 0F 1 1 0 1 0 1 1 C1
05 0FF 0F 1 1 0 1 0 1 1 C9
06 0FF 0F 1 1 0 1 0 1 1 D1
07 0FF 0F 1 1 0 1 0 1 1 D9
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 0FF 0F 1 1 0 1 0 1 1 E1
0f 0FF 0F 1 1 0 1 0 1 1 E9
IRQ to pin mappings:
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ12 -> 12
IRQ14 -> 14
IRQ15 -> 15
IRQ16 -> 0
IRQ17 -> 1
IRQ18 -> 2
IRQ20 -> 4
IRQ21 -> 5
IRQ22 -> 6
IRQ23 -> 7
IRQ30 -> 14
IRQ31 -> 15
.................................... done.
checking TSC synchronization across CPUs:
BIOS BUG: CPU#0 improperly initialized, has 9 usecs TSC skew! FIXED.
BIOS BUG: CPU#1 improperly initialized, has -9 usecs TSC skew! FIXED.
PCI: PCI BIOS revision 2.10 entry at 0xfc7ae
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:00 [1166/0009]: Scanning peer host bridges
PCI: Scanning ServerWorks HE/LE Peer Bus Bridge 00/00
PCI: 00:01 [1166/0009]: Scanning peer host bridges
PCI: Scanning ServerWorks HE/LE Peer Bus Bridge 00/01
PCI->APIC IRQ transform: (B1,I8,P0) -> 16
PCI->APIC IRQ transform: (B2,I4,P0) -> 31
PCI->APIC IRQ transform: (B2,I4,P1) -> 30
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 524288 bhash 65536)
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
Linux IP multicast router 0.06 plus PIM-SM
Initializing RT netlink socket
Starting kswapd v 1.5
vesafb: framebuffer at 0xfc000000, mapped to 0xe0009000, size 4096k
vesafb: mode is 1024x768x8, linelength=1024, pages=4
vesafb: protected mode interface info at c000:4ae8
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
PCI_IDE: unknown IDE controller on PCI bus 00 device 79, VID=1166, DID=0211
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG CD-ROM SN-124, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 1605.915 MB/sec
p5_mmx : 1688.973 MB/sec
8regs : 1252.347 MB/sec
32regs : 764.667 MB/sec
using fastest function: p5_mmx (1688.973 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
RAMDISK: Compressed image found at block 0
autodetecting RAID arrays
autorun ...
... autorun DONE.
apm: BIOS not found.
VFS: Mounted root (ext2 filesystem).
(scsi0) <Adaptec AIC-7899 Ultra 160/m SCSI host adapter> found at PCI 2/4/0
(scsi0) Wide Channel A, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 396 instructions downloaded
(scsi1) <Adaptec AIC-7899 Ultra 160/m SCSI host adapter> found at PCI 2/4/1
(scsi1) Wide Channel B, SCSI ID=7, 32/255 SCBs
(scsi1) Downloading sequencer code... 396 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4
<Adaptec AIC-7899 Ultra 160/m SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4
<Adaptec AIC-7899 Ultra 160/m SCSI host adapter>
scsi : 2 hosts.
Vendor: SEAGATE Model: ST318404LC Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: SEAGATE Model: ST318404LC Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: SEAGATE Model: ST318404LC Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdc at scsi0, channel 0, id 2, lun 0
Vendor: DELL Model: 1x4 U2W SCSI BP Rev: 1.16
Type: Processor ANSI SCSI revision: 02
(scsi0:0:0:0) Synchronous at 160.0 Mbyte/sec, offset 63.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 35566478 [17366 MB] [17.4 GB]
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
(scsi0:0:1:0) Synchronous at 160.0 Mbyte/sec, offset 63.
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 35566478 [17366 MB] [17.4 GB]
sdb:
(scsi0:0:2:0) Synchronous at 160.0 Mbyte/sec, offset 63.
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 35566478 [17366 MB] [17.4 GB]
sdc: sdc1 sdc2 < sdc5 >
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 84k freed
Adding Swap: 265032k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xe0468000, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
ISO 9660 Extensions: Microsoft Joliet Level 1
ISO 9660 Extensions: RRIP_1991A
Invalid session number or type of track
ISO 9660 Extensions: Microsoft Joliet Level 1
ISO 9660 Extensions: RRIP_1991A
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin
<saw@saw.sw.com.sg> and others
eepro100.c: VA Linux custom, Dragan Stancevic <visitor@valinux.com> 2000/11/15
eth0: Intel PCI EtherExpress Pro100 82557, 00:B0:D0:49:D8:31, I/O at 0xccc0,
IRQ 16.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 07195d-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Receiver lock-up workaround activated.