Linux version 2.2.5-22 (root@porky.devel.redhat.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Wed Jun 2 09:02:27 EDT 1999
Detected 334096611 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 666.83 BogoMIPS
Memory: 127716k/131072k available (996k kernel code, 412k reserved, 1572k data, 60k init)
VFS: Diskquotas version dquot_6.4.0 initialized
Enabling new style K6 write allocation for 128 Mb
CPU: AMD AMD-K6(tm) 3D processor stepping 0c
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xf0510
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
Initializing RT netlink socket
Starting kswapd v 1.5 
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
PIIX4: IDE controller on PCI bus 00 dev 09
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio
hda: Maxtor 91303D6, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: Maxtor 91303D6, 12427MB w/512kB Cache, CHS=1584/255/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: using high-speed MMX checksum routine
   pII_mmx   :   689.229 MB/sec
   p5_mmx    :   616.077 MB/sec
   8regs     :   476.250 MB/sec
   32regs    :   344.424 MB/sec
using fastest function: pII_mmx (689.229 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
 hda: hda1 hda2 < hda5 hda6 >
RAMDISK: Compressed image found at block 0
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem).
scsi: ***** BusLogic SCSI Driver Version 2.1.15 of 17 August 1998 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff 
scsi0: Configuring BusLogic Model BT-946C PCI SCSI Host Adapter
scsi0:   Firmware Version: 4.25J, I/O Address: 0xD400, IRQ Channel: 9/Level
scsi0:   PCI Bus: 0, Device: 9, Address: Unassigned, Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Disabled
scsi0:   Synchronous Negotiation: Fast, Wide Negotiation: Disabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 100
scsi0:   Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0:   Error Recovery Strategy: Default, SCSI Bus Reset: Enabled
scsi0:   SCSI Bus Termination: Enabled
scsi0: *** BusLogic BT-946C Initialized Successfully ***
scsi0 : BusLogic BT-946C
scsi : 1 host.
  Vendor: TEAC      Model: CD-R55S           Rev: 1.0J
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
scsi0: Target 0: Queue Depth 3, Synchronous at 10.0 MB/sec, offset 15
sr0: CDROM not ready.  Make sure there is a disc in the drive.
sr0: scsi3-mmc drive: 0x/0x caddy
Uniform CDROM driver Revision: 2.54
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 60k freed
Adding Swap: 128484k swap-space (priority -1)
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
SB 4.13 detected OK (220)
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c905 Boomerang 100baseTx at 0xd000,  00:60:97:de:83:83, IRQ 9
  8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
  MII transceiver found at address 24, status 786d.
  Enabling bus-master transmits and whole-frame receives.