Linux version 2.4.19-gentoo-r7 (root@cathode.dimlight.org) (gcc version 2.95.3 20010315 (release)) #4 Wed Sep 4 21:59:11 CDT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
BIOS-e820: 0000000007ff0000 - 0000000007ff3000 (ACPI NVS)
BIOS-e820: 0000000007ff3000 - 0000000008000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB LOWMEM available.
On node 0 totalpages: 32752
zone(0): 4096 pages.
zone(1): 28656 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda3
Initializing CPU#0
Detected 1468.587 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2891.77 BogoMIPS
Memory: 127216k/131008k available (1007k kernel code, 3404k reserved, 293k data, 220k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0383f9ff c1c3f9ff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383f9ff c1c3f9ff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff c1c3f9ff 00000000 00000000
CPU: Common caps: 0383f9ff c1c3f9ff 00000000 00000000
CPU: AMD Athlon(tm) XP 1700+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb690, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12 (20020219) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 240 slots per queue, batch=60
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: detected chipset, but driver not compiled in!
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:pio, hdd:DMA
hda: ST33232A, ATA DISK drive
hdd: LTN526, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 6303024 sectors (3227 MB), CHS=781/128/63
hdd: ATAPI 52X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: Detected AMD 761 chipset
agpgart: AGP aperture is 64M @ 0xf0000000
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 10 for device 00:07.2
PCI: Sharing IRQ 10 with 00:07.3
PCI: Sharing IRQ 10 with 00:0b.0
uhci.c: USB UHCI at I/O 0xd800, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 10 for device 00:07.3
PCI: Sharing IRQ 10 with 00:07.2
PCI: Sharing IRQ 10 with 00:0b.0
uhci.c: USB UHCI at I/O 0xdc00, IRQ 10
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 220k freed
Adding Swap: 266104k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal
PCI: Found IRQ 10 for device 00:0b.0
PCI: Sharing IRQ 10 with 00:07.2
PCI: Sharing IRQ 10 with 00:07.3
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:0b.0: 3Com PCI 3c905C Tornado at 0xe000. Vers LK1.1.16
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack (1023 buckets, 8184 max)
spurious 8259A interrupt: IRQ7.
natsemi.c:v1.07 1/9/2001 Written by Donald Becker
http://www.scyld.com/network/natsemi.html
(unofficial 2.4.x kernel port, version 1.0.4, February 26, 2001 Jeff Garzik, Tjeerd Mulder)
Driver modified by NETGEAR for FA31x
FA31x Fast Ethernet Driver v1.00
PCI: Found IRQ 11 for device 00:0f.0
eth1: NatSemi DP83815 at 0xc8889000, 00:40:f4:70:31:c3, IRQ 11.
eth1: Transceiver status 0x7849 advertising 05e1.
eth1: Setting full-duplex based on negotiated link capability.
VFS: Disk change detected on device ide1(22,64)