Linux version 2.6.26-gentoo-r3 (root@level51.lite3d.com) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #4 SMP PREEMPT Thu Dec 4 10:12:22 CST 2008
Command line: root=/dev/sda3
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000cfac0000 (usable)
BIOS-e820: 00000000cfac0000 - 00000000cfad6000 (reserved)
BIOS-e820: 00000000cfad6000 - 00000000cfaf5c00 (ACPI data)
BIOS-e820: 00000000cfaf5c00 - 00000000d0000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
Entering add_active_range(0, 0, 160) 0 entries of 3200 used
Entering add_active_range(0, 256, 850624) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200 used
max_pfn_mapped = 2293760
init_memory_mapping
DMI 2.4 present.
ACPI: RSDP 000F22A0, 0024 (r2 DELL )
ACPI: XSDT 000F231C, 008C (r1 DELL PE_SC3 1 DELL 1)
ACPI: FACP CFAF1BD8, 00F4 (r3 DELL PE_SC3 1 DELL 1)
ACPI: DSDT CFAD6000, 476A (r1 DELL PE_SC3 1 INTL 20050624)
ACPI: FACS CFAF4400, 0040
ACPI: APIC CFAF1878, 00A0 (r1 DELL PE_SC3 1 DELL 1)
ACPI: SPCR CFAF191C, 0050 (r1 DELL PE_SC3 1 DELL 1)
ACPI: HPET CFAF1970, 0038 (r1 DELL PE_SC3 1 DELL 1)
ACPI: MCFG CFAF19AC, 003C (r1 DELL PE_SC3 1 DELL 1)
ACPI: SLIC CFAF19EC, 0024 (r1 DELL PE_SC3 1 DELL 1)
ACPI: ERST CFADA8EC, 0210 (r1 DELL PE_SC3 1 DELL 1)
ACPI: HEST CFADAAFC, 027C (r1 DELL PE_SC3 1 DELL 1)
ACPI: BERT CFADA76C, 0030 (r1 DELL PE_SC3 1 DELL 1)
ACPI: EINJ CFADA79C, 0150 (r1 DELL PE_SC3 1 DELL 1)
ACPI: SRAT 000FC144, 0150 (r1 DELL PE_SC3 1 DELL 1)
ACPI: SSDT CFAF4800, 143C (r1 DELL PE_SC3 1 DELL 1)
ACPI: TCPA CFAF1B70, 0064 (r1 DELL PE_SC3 1 DELL 1)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 1 -> APIC 4 -> Node 1
SRAT: PXM 1 -> APIC 5 -> Node 1
SRAT: PXM 1 -> APIC 6 -> Node 1
SRAT: PXM 1 -> APIC 7 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
Entering add_active_range(0, 0, 160) 0 entries of 3200 used
SRAT: Node 0 PXM 0 100000-d0000000
Entering add_active_range(0, 256, 850624) 1 entries of 3200 used
SRAT: Node 0 PXM 0 100000000-130000000
Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
SRAT: Node 1 PXM 1 130000000-230000000
Entering add_active_range(1, 1245184, 2293760) 3 entries of 3200 used
NUMA: Allocated memnodemap from 12000 - 16640
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000130000000
NODE_DATA [0000000000001000 - 0000000000004fff]
bootmap [0000000000017000 - 000000000003cfff] pages 26
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] TRAMPOLINE
early res: 2 [200000-7dec07] TEXT DATA BSS
early res: 3 [9f000-fffff] BIOS reserved
early res: 4 [8000-11fff] PGTABLE
early res: 5 [12000-1663f] MEMNODEMAP
Bootmem setup node 1 0000000130000000-0000000230000000
NODE_DATA [0000000130000000 - 0000000130003fff]
bootmap [0000000130004000 - 0000000130023fff] pages 20
[ffffe20004280000-ffffe200043fffff] potential offnode page_structs
[ffffe20000000000-ffffe200043fffff] PMD -> [ffff81000c200000-ffff81000fbfffff] on node 0
[ffffe20004400000-ffffe20007bfffff] PMD -> [ffff810130200000-ffff8101339fffff] on node 1
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 2293760
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0 -> 160
0: 256 -> 850624
0: 1048576 -> 1245184
1: 1245184 -> 2293760
On node 0 totalpages: 1047136
DMA zone: 56 pages used for memmap
DMA zone: 1618 pages reserved
DMA zone: 2326 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 832248 pages, LIFO batch:31
Normal zone: 2688 pages used for memmap
Normal zone: 193920 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
On node 1 totalpages: 1048576
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 14336 pages used for memmap
Normal zone: 1034240 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[32])
IOAPIC[1]: apic_id 9, version 0, address 0xfec01000, GSI 32-47
ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[64])
IOAPIC[2]: apic_id 10, version 0, address 0xfec02000, GSI 64-79
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x1166a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d2000000 (gap: d0000000:20000000)
SMP: Allowing 8 CPUs, 0 hotplug CPUs
PERCPU: Allocating 34928 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 8
Built 2 zonelists in Node order, mobility grouping on. Total pages: 2062734
Policy zone: Normal
Kernel command line: root=/dev/sda3
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
time.c: Detected 1995.005 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
Node 0: aperture @ f4000000 size 64 MB
Node 1: aperture @ f4000000 size 64 MB
Memory: 8259148k/9175040k available (2951k kernel code, 123700k reserved, 1668k data, 428k init)
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay using timer specific routine.. 3992.87 BogoMIPS (lpj=7985742)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20080321
CPU0: Quad-Core AMD Opteron(tm) Processor 2350 stepping 03
Using local APIC timer interrupts.
APIC timer calibration result 12471358
Detected 12.471 MHz APIC timer.
Booting processor 1/4 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3991.11 BogoMIPS (lpj=7982224)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/4 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU1: Quad-Core AMD Opteron(tm) Processor 2350 stepping 03
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2/1 ip 6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 3995.57 BogoMIPS (lpj=7991149)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 2/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU2: Quad-Core AMD Opteron(tm) Processor 2350 stepping 03
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3/5 ip 6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 3991.01 BogoMIPS (lpj=7982023)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 3/5 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU3: Quad-Core AMD Opteron(tm) Processor 2350 stepping 03
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Booting processor 4/2 ip 6000
Initializing CPU#4
Calibrating delay using timer specific routine.. 3995.58 BogoMIPS (lpj=7991179)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 4/2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU4: Quad-Core AMD Opteron(tm) Processor 2350 stepping 03
checking TSC synchronization [CPU#0 -> CPU#4]: passed.
Booting processor 5/6 ip 6000
Initializing CPU#5
Calibrating delay using timer specific routine.. 3991.00 BogoMIPS (lpj=7982015)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 5/6 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU5: Quad-Core AMD Opteron(tm) Processor 2350 stepping 03
checking TSC synchronization [CPU#0 -> CPU#5]: passed.
Booting processor 6/3 ip 6000
Initializing CPU#6
Calibrating delay using timer specific routine.. 3995.58 BogoMIPS (lpj=7991162)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 6/3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU6: Quad-Core AMD Opteron(tm) Processor 2350 stepping 03
checking TSC synchronization [CPU#0 -> CPU#6]: passed.
Booting processor 7/7 ip 6000
Initializing CPU#7
Calibrating delay using timer specific routine.. 3990.98 BogoMIPS (lpj=7981979)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 7/7 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU7: Quad-Core AMD Opteron(tm) Processor 2350 stepping 03
checking TSC synchronization [CPU#0 -> CPU#7]: passed.
Brought up 8 CPUs
Total of 8 processors activated (31943.73 BogoMIPS).
net_namespace: 568 bytes
NET: Registered protocol family 16
No dock devices found.
node 0 link 1: io port [d000, efff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [f0000000, f1ffffff]
node 0 link 1: mmio [d8000000, e00fffff]
node 0 link 1: mmio [e8000000, ee2fffff]
node 0 link 1: mmio [f0000000, f1ffffff] ==> none
node 0 link 1: mmio [a0000, bffff]
TOM2: 0000000230000000 aka 8960M
bus: [00,fe] on node 0 link 1
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [d0000000, e7ffffff]
bus: 00 index 2 mmio: [e8000000, efffffff]
bus: 00 index 3 mmio: [a0000, bffff]
bus: 00 index 4 mmio: [f2000000, ffffffff]
bus: 00 index 5 mmio: [230000000, fcffffffff]
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor: Dell Inc.
ACPI: DMI Product Name: PowerEdge 2970
ACPI: DMI Product Version:
ACPI: DMI Board Name: 0W468G
ACPI: DMI BIOS Vendor: Dell Inc.
ACPI: DMI BIOS Date: 07/23/2008
ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: Enabling HT MSI Mapping
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2.UPST._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2.UPST.DWN1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2.UPST.DWN2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2.UPST.DWN3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB3._PRT]
ACPI: PCI Interrupt Link [LK10] (IRQs 3 4 *5 6 7 10 11)
ACPI: PCI Interrupt Link [LK11] (IRQs 3 4 5 6 7 *10 11)
ACPI: PCI Interrupt Link [LK12] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK13] (IRQs 3 4 5 6 7 *10 11)
ACPI: PCI Interrupt Link [LK14] (IRQs 3 4 *5 6 7 10 11)
ACPI: PCI Interrupt Link [LK15] (IRQs 3 4 *5 6 7 10 11)
ACPI: PCI Interrupt Link [LK16] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK17] (IRQs 3 4 5 6 7 *10 11)
ACPI: PCI Interrupt Link [LK18] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK19] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK1A] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK1B] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK1C] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK1D] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK1F] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK20] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK21] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK22] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK23] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK24] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK25] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK26] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK27] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK28] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK29] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK2A] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK2B] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK2C] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK2D] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK2F] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 12 14)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 *11 12 14)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ f4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
system 00:08: ioport range 0x800-0x81f has been reserved
system 00:08: ioport range 0x880-0x8ff has been reserved
system 00:08: ioport range 0xcd6-0xcd7 has been reserved
system 00:08: ioport range 0x40b-0x40b has been reserved
system 00:08: ioport range 0x4d6-0x4d6 has been reserved
system 00:08: ioport range 0x820-0x83f has been reserved
system 00:08: ioport range 0x850-0x85f has been reserved
system 00:08: ioport range 0x860-0x863 has been reserved
system 00:08: ioport range 0x864-0x867 has been reserved
system 00:08: ioport range 0xc00-0xca7 has been reserved
system 00:08: ioport range 0xca0-0xca7 has been reserved
system 00:08: ioport range 0xca9-0xcab has been reserved
system 00:08: ioport range 0xcad-0xcaf has been reserved
system 00:08: ioport range 0xf50-0xf58 has been reserved
system 00:08: ioport range 0x900-0x900 has been reserved
system 00:09: ioport range 0xca8-0xca8 has been reserved
system 00:09: ioport range 0xcac-0xcac has been reserved
system 00:0a: iomem range 0xf0000000-0xf1ffffff could not be reserved
PCI: Bridge: 0000:0a:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:01.0
IO window: e000-efff
MEM window: 0xee100000-0xee2fffff
PREFETCH window: 0x00000000d2000000-0x00000000d20fffff
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:08.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:03:00.0
IO window: disabled.
MEM window: 0xec000000-0xedffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:02:01.0
IO window: disabled.
MEM window: 0xec000000-0xedffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:05:00.0
IO window: disabled.
MEM window: 0xea000000-0xebffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:02:02.0
IO window: disabled.
MEM window: 0xea000000-0xebffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:07:00.0
IO window: disabled.
MEM window: 0xe9e00000-0xe9ffffff
PREFETCH window: 0x00000000e0000000-0x00000000e00fffff
PCI: Bridge: 0000:07:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:03.0
IO window: disabled.
MEM window: 0xe9e00000-0xe9ffffff
PREFETCH window: 0x00000000e0000000-0x00000000e00fffff
PCI: Bridge: 0000:01:00.0
IO window: disabled.
MEM window: 0xe8000000-0xedffffff
PREFETCH window: 0x00000000e0000000-0x00000000e00fffff
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: 0xe8000000-0xedffffff
PREFETCH window: 0x00000000e0000000-0x00000000e00fffff
PCI: Bridge: 0000:00:0a.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 32 (level, low) -> IRQ 32
PCI: Setting latency timer of device 0000:00:07.0 to 64
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 33 (level, low) -> IRQ 33
PCI: Setting latency timer of device 0000:00:08.0 to 64
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 37 (level, low) -> IRQ 37
PCI: Setting latency timer of device 0000:00:09.0 to 64
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 37 (level, low) -> IRQ 37
PCI: Setting latency timer of device 0000:01:00.0 to 64
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 37 (level, low) -> IRQ 37
PCI: Setting latency timer of device 0000:02:01.0 to 64
PCI: Setting latency timer of device 0000:03:00.0 to 64
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 37 (level, low) -> IRQ 37
PCI: Setting latency timer of device 0000:02:02.0 to 64
PCI: Setting latency timer of device 0000:05:00.0 to 64
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 37 (level, low) -> IRQ 37
PCI: Setting latency timer of device 0000:02:03.0 to 64
PCI: Setting latency timer of device 0000:07:00.0 to 64
PCI: Setting latency timer of device 0000:07:00.2 to 64
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 35 (level, low) -> IRQ 35
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 36 (level, low) -> IRQ 36
PCI: Setting latency timer of device 0000:00:0b.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
msgmni has been set to 16131
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:04.0: Boot video device
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
PCI: Setting latency timer of device 0000:00:08.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:08.0:pcie00]
PCI: Setting latency timer of device 0000:00:09.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:09.0:pcie00]
PCI: Setting latency timer of device 0000:00:0a.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0a.0:pcie00]
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PCI: Setting latency timer of device 0000:01:00.0 to 64
assign_interrupt_mode Found MSI capability
PCI: Setting latency timer of device 0000:02:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:02:01.0:pcie22]
PCI: Setting latency timer of device 0000:02:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:02:02.0:pcie22]
PCI: Setting latency timer of device 0000:02:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:02:03.0:pcie22]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.103
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: ACPI0007:02 is registered as cooling_device2
ACPI: ACPI0007:03 is registered as cooling_device3
ACPI: ACPI0007:04 is registered as cooling_device4
ACPI: ACPI0007:05 is registered as cooling_device5
ACPI: ACPI0007:06 is registered as cooling_device6
ACPI: ACPI0007:07 is registered as cooling_device7
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
console [netcon0] enabled
netconsole: network logging started
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
hda: TEAC DVD-ROM DV28EV, ATAPI CD/DVD-ROM drive
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ATAPI 24X DVD-ROM drive, 198kB Cache
Uniform CD-ROM driver Revision: 3.20
megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
megasas: 0x1028:0x0015:0x1028:0x1f03: bus 8:slot 14:func 0
ACPI: PCI Interrupt 0000:08:0e.0[A] -> GSI 37 (level, low) -> IRQ 37
megasas: FW now in Ready state
scsi0 : LSI SAS based MegaRAID driver
scsi 0:0:0:0: Direct-Access FUJITSU MBA3073RC D306 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA Hitachi HUA72101 A9N1 PQ: 0 ANSI: 5
scsi 0:0:2:0: Direct-Access ATA Hitachi HUA72101 A9N1 PQ: 0 ANSI: 5
scsi 0:0:3:0: Direct-Access ATA Hitachi HUA72101 A9N1 PQ: 0 ANSI: 5
scsi 0:0:4:0: Direct-Access ATA Hitachi HUA72101 A9N1 PQ: 0 ANSI: 5
scsi 0:0:5:0: Direct-Access ATA Hitachi HUA72101 A9N1 PQ: 0 ANSI: 5
scsi 0:0:8:0: Enclosure DP BACKPLANE 1.05 PQ: 0 ANSI: 5
scsi 0:2:0:0: Direct-Access DELL PERC 5/i 1.03 PQ: 0 ANSI: 5
scsi 0:2:1:0: Direct-Access DELL PERC 5/i 1.03 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:2:0:0: [sda] 142082048 512-byte hardware sectors (72746 MB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:2:0:0: [sda] 142082048 512-byte hardware sectors (72746 MB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:2:0:0: [sda] Attached SCSI disk
sd 0:2:1:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
sd 0:2:1:0: [sdb] 7809794048 512-byte hardware sectors (3998615 MB)
sd 0:2:1:0: [sdb] Write Protect is off
sd 0:2:1:0: [sdb] Mode Sense: 1f 00 00 08
sd 0:2:1:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
sd 0:2:1:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
sd 0:2:1:0: [sdb] 7809794048 512-byte hardware sectors (3998615 MB)
sd 0:2:1:0: [sdb] Write Protect is off
sd 0:2:1:0: [sdb] Mode Sense: 1f 00 00 08
sd 0:2:1:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
sdb: unknown partition table
sd 0:2:1:0: [sdb] Attached SCSI disk
Driver 'sr' needs updating - please use bus_type methods
scsi 0:0:8:0: Attached scsi generic sg0 type 13
sd 0:2:0:0: Attached scsi generic sg1 type 0
sd 0:2:1:0: Attached scsi generic sg2 type 0
sata_svw 0000:0a:0e.0: version 2.3
ACPI: PCI Interrupt Link [LK07] enabled at IRQ 11
ACPI: PCI Interrupt 0000:0a:0e.0[A] -> Link [LK07] -> GSI 11 (level, low) -> IRQ 11
scsi1 : sata_svw
scsi2 : sata_svw
scsi3 : sata_svw
scsi4 : sata_svw
ata1: SATA max UDMA/133 mmio m8192@0xee2fe000 port 0xee2fe000 irq 11
ata2: SATA max UDMA/133 mmio m8192@0xee2fe000 port 0xee2fe100 irq 11
ata3: SATA max UDMA/133 mmio m8192@0xee2fe000 port 0xee2fe200 irq 11
ata4: SATA max UDMA/133 mmio m8192@0xee2fe000 port 0xee2fe300 irq 11
ata1: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ieee1394: raw1394: /dev/raw1394 device initialized
ACPI: PCI Interrupt Link [LK01] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:03.2[A] -> Link [LK01] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.2: irq 10, io mem 0xee0ef000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LK01] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 10, io mem 0xee0ed000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LK01] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 10, io mem 0xee0ee000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
USB Universal Host Controller Interface driver v3.0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 2 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 4
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 2-2: new low speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usb 1-1.1: new full speed USB device using ehci_hcd and address 5
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-4.1: new high speed USB device using ehci_hcd and address 6
usb 1-4.1: configuration #1 chosen from 1 choice
hub 1-4.1:1.0: USB hub found
hub 1-4.1:1.0: 4 ports detected
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
input: NOVATEK Generic USB Keyboard as /class/input/input1
input: USB HID v1.10 Keyboard [NOVATEK Generic USB Keyboard] on usb-0000:00:03.0-2
input: Dell DRAC5 as /class/input/input2
input: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:03.2-1.1
input: Dell DRAC5 as /class/input/input3
input: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:03.2-1.1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
powernow-k8: Found 2 Quad-Core AMD Opteron(tm) Processor 2350 processors (8 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2000 MHz)
powernow-k8: 1 : pstate 1 (1700 MHz)
powernow-k8: 2 : pstate 2 (1400 MHz)
powernow-k8: 3 : pstate 3 (1200 MHz)
powernow-k8: 4 : pstate 4 (1000 MHz)
powernow-k8: 0 : pstate 0 (2000 MHz)
powernow-k8: 1 : pstate 1 (1700 MHz)
powernow-k8: 2 : pstate 2 (1400 MHz)
powernow-k8: 3 : pstate 3 (1200 MHz)
powernow-k8: 4 : pstate 4 (1000 MHz)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 428k freed
EXT3 FS on sda3, internal journal
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.5 (April 29, 2008)
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 37 (level, low) -> IRQ 37
eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem ec000000, IRQ 37, node addr 00:22:19:50:29:81
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 37 (level, low) -> IRQ 37
eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem ea000000, IRQ 37, node addr 00:22:19:50:29:83
xor: automatically using best checksumming function: generic_sse
generic_sse: 7674.000 MB/sec
xor: using function: generic_sse (7674.000 MB/sec)
async_tx: api initialized (sync-only)
raid6: int64x1 2069 MB/s
raid6: int64x2 2519 MB/s
raid6: int64x4 2455 MB/s
raid6: int64x8 1333 MB/s
raid6: sse2x1 2659 MB/s
raid6: sse2x2 4016 MB/s
raid6: sse2x4 5088 MB/s
raid6: using algorithm sse2x4 (5088 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
fuse init (API version 7.9)
Ethernet Channel Bonding Driver: v3.2.5 (March 21, 2008)
bonding: In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (0 msec) is incompatible with the forwarding delay time of the switch
bonding: MII link monitoring set to 100 ms
Adding 31254448k swap on /dev/sda2. Priority:-1 extents:1 across:31254448k
bnx2: eth0: using MSI
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
bnx2: eth0: using MSI
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present