[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-21lenny3) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Feb 11 00:59:32 UTC 2010 [ 0.000000] Command line: root=/dev/hda1 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098000 (usable) [ 0.000000] BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cbbd6000 (usable) [ 0.000000] BIOS-e820: 00000000cbbd6000 - 00000000cbc58000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cbc58000 - 00000000cbd53000 (reserved) [ 0.000000] BIOS-e820: 00000000cbd53000 - 00000000cbd56000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cbd56000 - 00000000cbe56000 (reserved) [ 0.000000] BIOS-e820: 00000000cbe56000 - 00000000cbe5e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cbe5e000 - 00000000cbe68000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cbe68000 - 00000000cbe8a000 (reserved) [ 0.000000] BIOS-e820: 00000000cbe8a000 - 00000000cbe90000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cbe90000 - 00000000cc000000 (usable) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000012c000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 152) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 834518) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 835216, 835584) 2 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1228800) 3 entries of 3200 used [ 0.000000] max_pfn_mapped = 1228800 [ 0.000000] init_memory_mapping [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F03C0, 0024 (r2 INTEL) [ 0.000000] ACPI: XSDT CBE5CE18, 004C (r1 INTEL DG43NB 68 MSFT 10013) [ 0.000000] ACPI: FACP CBE5BD98, 00F4 (r4 INTEL DG43NB 6222004 MSFT 10013) [ 0.000000] ACPI: DSDT CBE56018, 4E89 (r1 INTEL DG43NB 68 INTL 20051117) [ 0.000000] ACPI: FACS CBE64F40, 0040 [ 0.000000] ACPI: APIC CBE5BF18, 006C (r2 INTEL DG43NB 68 MSFT 10013) [ 0.000000] ACPI: MCFG CBE66E18, 003C (r1 INTEL DG43NB 68 MSFT 97) [ 0.000000] ACPI: ASF! CBE65D18, 00A0 (r32 INTEL DG43NB 68 TFSM F4240) [ 0.000000] ACPI: HPET CBE66D98, 0038 (r1 INTEL DG43NB 68 AMI. 3) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000012c000000 [ 0.000000] Entering add_active_range(0, 0, 152) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 834518) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 835216, 835584) 2 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1228800) 3 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000012c000000 [ 0.000000] NODE_DATA [000000000000e000 - 0000000000012fff] [ 0.000000] bootmap [0000000000013000 - 00000000000387ff] pages 26 [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE [ 0.000000] early res: 2 [200000-675397] TEXT DATA BSS [ 0.000000] early res: 3 [37952000-37fef6fd] RAMDISK [ 0.000000] early res: 4 [98000-fffff] BIOS reserved [ 0.000000] early res: 5 [8000-dfff] PGTABLE [ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0 [ 0.000000] [ffffe20003800000-ffffe200043fffff] PMD -> [ffff81000c000000-ffff81000cbfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1228800 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0 -> 152 [ 0.000000] 0: 256 -> 834518 [ 0.000000] 0: 835216 -> 835584 [ 0.000000] 0: 1048576 -> 1228800 [ 0.000000] On node 0 totalpages: 1015006 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1254 pages reserved [ 0.000000] DMA zone: 2682 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 816510 pages, LIFO batch:31 [ 0.000000] Normal zone: 2464 pages used for memmap [ 0.000000] Normal zone: 177760 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cbbd6000 - 00000000cbc58000 [ 0.000000] PM: Registered nosave memory: 00000000cbc58000 - 00000000cbd53000 [ 0.000000] PM: Registered nosave memory: 00000000cbd53000 - 00000000cbd56000 [ 0.000000] PM: Registered nosave memory: 00000000cbd56000 - 00000000cbe56000 [ 0.000000] PM: Registered nosave memory: 00000000cbe56000 - 00000000cbe5e000 [ 0.000000] PM: Registered nosave memory: 00000000cbe5e000 - 00000000cbe68000 [ 0.000000] PM: Registered nosave memory: 00000000cbe68000 - 00000000cbe8a000 [ 0.000000] PM: Registered nosave memory: 00000000cbe8a000 - 00000000cbe90000 [ 0.000000] PM: Registered nosave memory: 00000000cc000000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: cc000000:32d1c000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 996952 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/hda1 ro quiet [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] time.c: Detected 3324.998 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Placing software IO TLB between 0x4000000 - 0x8000000 [ 0.004000] Memory: 3922900k/4915200k available (2228k kernel code, 137124k reserved, 1085k data, 392k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] hpet clockevent registered [ 0.083748] Calibrating delay using timer specific routine.. 6655.00 BogoMIPS (lpj=13310013) [ 0.083776] Security Framework initialized [ 0.083781] SELinux: Disabled at boot. [ 0.083783] Capability LSM initialized [ 0.084005] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.084005] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.084005] Mount-cache hash table entries: 256 [ 0.084005] Initializing cgroup subsys ns [ 0.084005] Initializing cgroup subsys cpuacct [ 0.084005] Initializing cgroup subsys devices [ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.084005] CPU: L2 cache: 6144K [ 0.084005] CPU 0/0 -> Node 0 [ 0.084005] CPU: Physical Processor ID: 0 [ 0.084005] CPU: Processor Core ID: 0 [ 0.084005] CPU0: Thermal monitoring enabled (TM2) [ 0.084005] using mwait in idle threads. [ 0.084005] ACPI: Core revision 20080321 [ 0.130591] CPU0: Intel(R) Core(TM)2 Duo CPU E8600 @ 3.33GHz stepping 0a [ 0.130594] Using local APIC timer interrupts. [ 0.136008] APIC timer calibration result 20781289 [ 0.136008] Detected 20.781 MHz APIC timer. [ 0.136008] Booting processor 1/1 ip 6000 [ 0.144009] Initializing CPU#1 [ 0.144009] Calibrating delay using timer specific routine.. 6650.05 BogoMIPS (lpj=13300107) [ 0.144009] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.144009] CPU: L2 cache: 6144K [ 0.144009] CPU 1/1 -> Node 0 [ 0.144009] CPU: Physical Processor ID: 0 [ 0.144009] CPU: Processor Core ID: 1 [ 0.144009] CPU1: Thermal monitoring enabled (TM2) [ 0.224014] CPU1: Intel(R) Core(TM)2 Duo CPU E8600 @ 3.33GHz stepping 0a [ 0.224014] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.228014] Brought up 2 CPUs [ 0.228014] Total of 2 processors activated (13305.06 BogoMIPS). [ 0.228014] CPU0 attaching sched-domain: [ 0.228014] domain 0: span 0-1 [ 0.228014] groups: 0 1 [ 0.228014] domain 1: span 0-1 [ 0.228014] groups: 0-1 [ 0.228014] CPU1 attaching sched-domain: [ 0.228014] domain 0: span 0-1 [ 0.228014] groups: 1 0 [ 0.228014] domain 1: span 0-1 [ 0.228014] groups: 0-1 [ 0.228014] net_namespace: 1224 bytes [ 0.228014] Booting paravirtualized kernel on bare hardware [ 0.228014] NET: Registered protocol family 16 [ 0.228014] ACPI: bus type pci registered [ 0.228014] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 [ 0.228014] PCI: Not using MMCONFIG. [ 0.228014] PCI: Using configuration type 1 for base access [ 0.228014] ACPI: EC: Look up EC in DSDT [ 0.232014] ACPI: Interpreter enabled [ 0.232014] ACPI: (supports S0 S1 S3 S4 S5) [ 0.232014] ACPI: Using IOAPIC for interrupt routing [ 0.232014] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 [ 0.232014] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources [ 0.236014] PCI: Using MMCONFIG at f0000000 - f7ffffff [ 0.240015] ACPI: BIOS _OSI(Linux) query ignored [ 0.240015] ACPI: DMI System Vendor: [ 0.240015] ACPI: DMI Product Name: [ 0.240015] ACPI: DMI Product Version: [ 0.240015] ACPI: DMI Board Name: DG43NB [ 0.240015] ACPI: DMI BIOS Vendor: Intel Corp. [ 0.240015] ACPI: DMI BIOS Date: 01/22/2010 [ 0.240015] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org [ 0.240015] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org [ 0.244015] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.244015] PCI: Transparent bridge - 0000:00:1e.0 [ 0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.248016] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.248016] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.248016] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.248016] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.248016] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.248016] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.248016] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.248016] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.248016] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.248016] pnp: PnP ACPI init [ 0.248016] ACPI: bus type pnp registered [ 0.248016] pnp 00:00: parse allocated resources [ 0.248016] pnp 00:00: add io 0xcf8-0xcff flags 0x1 [ 0.248016] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.248016] pnp 00:01: parse allocated resources [ 0.248016] pnp 00:01: add mem 0xfed14000-0xfed19fff flags 0x1 [ 0.248016] pnp 00:01: add mem 0xf0000000-0xf7ffffff flags 0x1 [ 0.248016] pnp 00:01: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c [ 0.248016] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.248016] pnp 00:02: parse allocated resources [ 0.248016] pnp 00:02: add io 0x0-0xffffffffffffffff flags 0x10000001 [ 0.248016] pnp 00:02: add io 0x0-0xffffffffffffffff flags 0x10000001 [ 0.248016] pnp 00:02: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.248016] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.248016] pnp 00:03: parse allocated resources [ 0.248016] pnp 00:03: add io 0x3f8-0x3ff flags 0x1 [ 0.248016] pnp 00:03: add irq 4 flags 0x1 [ 0.248016] pnp 00:03: parse resource options [ 0.248016] pnp 00:03: new independent option [ 0.248016] pnp 00:03: new dependent option (priority 0x0) [ 0.248016] pnp 00:03: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1 [ 0.248016] pnp 00:03: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1 [ 0.248016] pnp 00:03: new dependent option (priority 0x1) [ 0.248016] pnp 00:03: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1 [ 0.248016] pnp 00:03: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.248016] pnp 00:03: new dependent option (priority 0x1) [ 0.248016] pnp 00:03: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1 [ 0.248016] pnp 00:03: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.248016] pnp 00:03: new dependent option (priority 0x1) [ 0.248016] pnp 00:03: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1 [ 0.248016] pnp 00:03: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.248016] pnp 00:03: new dependent option (priority 0x1) [ 0.248016] pnp 00:03: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1 [ 0.248016] pnp 00:03: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.248016] pnp 00:03: end dependent options [ 0.248016] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.248016] pnp 00:04: parse allocated resources [ 0.248016] pnp 00:04: add dma 4 flags 0x4 [ 0.248016] pnp 00:04: add io 0x0-0xf flags 0x1 [ 0.248016] pnp 00:04: add io 0x81-0x83 flags 0x1 [ 0.248016] pnp 00:04: add io 0x87-0x87 flags 0x1 [ 0.248016] pnp 00:04: add io 0x89-0x8b flags 0x1 [ 0.248016] pnp 00:04: add io 0x8f-0x8f flags 0x1 [ 0.248016] pnp 00:04: add io 0xc0-0xdf flags 0x1 [ 0.248016] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.248016] pnp 00:05: parse allocated resources [ 0.248016] pnp 00:05: add io 0x70-0x71 flags 0x1 [ 0.248016] pnp 00:05: add irq 8 flags 0x1 [ 0.248016] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.248016] pnp 00:06: parse allocated resources [ 0.248016] pnp 00:06: add io 0x61-0x61 flags 0x1 [ 0.248016] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.248016] pnp 00:07: parse allocated resources [ 0.248016] pnp 00:07: add io 0x10-0x1f flags 0x1 [ 0.248016] pnp 00:07: add io 0x22-0x3f flags 0x1 [ 0.248016] pnp 00:07: add io 0x44-0x5f flags 0x1 [ 0.248016] pnp 00:07: add io 0x62-0x63 flags 0x1 [ 0.248016] pnp 00:07: add io 0x65-0x6f flags 0x1 [ 0.248016] pnp 00:07: add io 0x72-0x7f flags 0x1 [ 0.248016] pnp 00:07: add io 0x80-0x80 flags 0x1 [ 0.248016] pnp 00:07: add io 0x84-0x86 flags 0x1 [ 0.248016] pnp 00:07: add io 0x88-0x88 flags 0x1 [ 0.248016] pnp 00:07: add io 0x8c-0x8e flags 0x1 [ 0.248016] pnp 00:07: add io 0x90-0x9f flags 0x1 [ 0.248016] pnp 00:07: add io 0xa2-0xbf flags 0x1 [ 0.248016] pnp 00:07: add io 0xe0-0xef flags 0x1 [ 0.248016] pnp 00:07: add io 0x4d0-0x4d1 flags 0x1 [ 0.248016] pnp 00:07: add mem 0xffe00000-0xffffffff flags 0x0 [ 0.248016] pnp 00:07: add mem 0xfed30000-0xfed3ffff flags 0x0 [ 0.248016] pnp 00:07: add mem 0xfed08000-0xfed08fff flags 0x0 [ 0.248016] pnp 00:07: add io 0x540-0x57f flags 0x1 [ 0.248016] pnp 00:07: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.252016] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.252016] pnp 00:08: parse allocated resources [ 0.252016] pnp 00:08: add io 0xf0-0xff flags 0x1 [ 0.252016] pnp 00:08: add irq 13 flags 0x1 [ 0.252016] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.252016] pnp 00:09: parse allocated resources [ 0.252016] pnp 00:09: add io 0x400-0x47f flags 0x1 [ 0.252016] pnp 00:09: add io 0x1180-0x119f flags 0x1 [ 0.252016] pnp 00:09: add io 0x500-0x57f flags 0x1 [ 0.252016] pnp 00:09: add mem 0xfed1c000-0xfed1ffff flags 0x1 [ 0.252016] pnp 00:09: add mem 0xfec00000-0xfecfffff flags 0x1 [ 0.252016] pnp 00:09: add mem 0xfee00000-0xfee0ffff flags 0x1 [ 0.252016] pnp 00:09: add mem 0xff000000-0xffffffff flags 0x0 [ 0.252016] pnp 00:09: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c [ 0.252016] pnp 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.252016] pnp 00:0a: parse allocated resources [ 0.252016] pnp 00:0a: add mem 0xfed00000-0xfed003ff flags 0x1 [ 0.252016] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.252016] pnp: PnP ACPI: found 11 devices [ 0.252016] ACPI: ACPI bus type pnp unregistered [ 0.252016] usbcore: registered new interface driver usbfs [ 0.252016] usbcore: registered new interface driver hub [ 0.252016] usbcore: registered new device driver usb [ 0.252017] PCI: Using ACPI for IRQ routing [ 0.279649] PCI-GART: No AMD northbridge found. [ 0.279655] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.279659] hpet0: 4 64-bit timers, 14318180 Hz [ 0.283598] ACPI: RTC can wake from S4 [ 0.294475] pnp: the driver 'system' has been registered [ 0.294485] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.294488] system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved [ 0.294490] system 00:01: driver attached [ 0.294495] system 00:02: driver attached [ 0.294501] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.294504] system 00:07: ioport range 0x540-0x57f has been reserved [ 0.294507] system 00:07: iomem range 0xffe00000-0xffffffff could not be reserved [ 0.294510] system 00:07: iomem range 0xfed30000-0xfed3ffff has been reserved [ 0.294512] system 00:07: iomem range 0xfed08000-0xfed08fff has been reserved [ 0.294514] system 00:07: driver attached [ 0.294519] system 00:09: ioport range 0x400-0x47f has been reserved [ 0.294522] system 00:09: ioport range 0x1180-0x119f has been reserved [ 0.294525] system 00:09: ioport range 0x500-0x57f could not be reserved [ 0.294528] system 00:09: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 0.294531] system 00:09: iomem range 0xfec00000-0xfecfffff has been reserved [ 0.294534] system 00:09: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.294537] system 00:09: iomem range 0xff000000-0xffffffff could not be reserved [ 0.294539] system 00:09: driver attached [ 0.295675] PCI: Bridge: 0000:00:01.0 [ 0.295675] IO window: disabled. [ 0.295675] MEM window: 0xe0000000-0xe11fffff [ 0.295675] PREFETCH window: disabled. [ 0.295675] PCI: Bridge: 0000:00:1c.0 [ 0.295675] IO window: disabled. [ 0.295675] MEM window: disabled. [ 0.295675] PREFETCH window: disabled. [ 0.295675] PCI: Bridge: 0000:00:1c.2 [ 0.295675] IO window: e000-efff [ 0.295675] MEM window: 0xe1b00000-0xe1bfffff [ 0.295675] PREFETCH window: disabled. [ 0.295675] PCI: Bridge: 0000:00:1c.3 [ 0.295675] IO window: d000-dfff [ 0.295675] MEM window: 0xe1a00000-0xe1afffff [ 0.295675] PREFETCH window: disabled. [ 0.295675] PCI: Bridge: 0000:00:1e.0 [ 0.295675] IO window: c000-cfff [ 0.295675] MEM window: 0xe1800000-0xe19fffff [ 0.295675] PREFETCH window: 0x00000000e1200000-0x00000000e12fffff [ 0.295675] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.295675] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.295675] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.295675] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.295675] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.295675] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.295675] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 0.295675] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.295675] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.295675] NET: Registered protocol family 2 [ 0.331126] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.331588] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.331588] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.331588] TCP: Hash tables configured (established 524288 bind 65536) [ 0.331588] TCP reno registered [ 0.339956] NET: Registered protocol family 1 [ 0.340060] checking if image is initramfs... it is [ 0.507562] Switched to high resolution mode on CPU 1 [ 0.507563] Switched to high resolution mode on CPU 0 [ 0.682913] Freeing initrd memory: 6773k freed [ 0.683434] audit: initializing netlink socket (disabled) [ 0.683434] type=2000 audit(1271865931.672:1): initialized [ 0.683434] Total HugeTLB memory allocated, 0 [ 0.683434] VFS: Disk quotas dquot_6.5.1 [ 0.683434] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.683434] msgmni has been set to 7675 [ 0.683476] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.683476] io scheduler noop registered [ 0.683476] io scheduler anticipatory registered [ 0.683476] io scheduler deadline registered [ 0.683476] io scheduler cfq registered (default) [ 0.683476] pci 0000:00:02.0: Boot video device [ 10.476380] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 20.499039] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 20.503034] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 20.503034] assign_interrupt_mode Found MSI capability [ 20.503034] Allocate Port Service[0000:00:01.0:pcie00] [ 20.503034] Allocate Port Service[0000:00:01.0:pcie03] [ 20.503034] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 20.503034] assign_interrupt_mode Found MSI capability [ 20.503034] Allocate Port Service[0000:00:1c.0:pcie00] [ 20.503034] Allocate Port Service[0000:00:1c.0:pcie02] [ 20.503034] Allocate Port Service[0000:00:1c.0:pcie03] [ 20.503034] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 20.503034] assign_interrupt_mode Found MSI capability [ 20.503036] Allocate Port Service[0000:00:1c.2:pcie00] [ 20.503534] Allocate Port Service[0000:00:1c.2:pcie02] [ 20.503534] Allocate Port Service[0000:00:1c.2:pcie03] [ 20.503534] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 20.503534] assign_interrupt_mode Found MSI capability [ 20.503534] Allocate Port Service[0000:00:1c.3:pcie00] [ 20.503534] Allocate Port Service[0000:00:1c.3:pcie03] [ 20.503534] hpet_resources: 0xfed00000 is busy [ 20.503534] Linux agpgart interface v0.103 [ 20.503534] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 20.503534] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 20.503534] pnp: the driver 'serial' has been registered [ 20.503534] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 20.503534] serial 00:03: driver attached [ 20.503534] brd: module loaded [ 20.503534] input: Macintosh mouse button emulation as /class/input/input0 [ 20.503535] pnp: the driver 'i8042 kbd' has been registered [ 20.503535] pnp: the driver 'i8042 aux' has been registered [ 20.503535] pnp: the driver 'i8042 kbd' has been unregistered [ 20.503535] pnp: the driver 'i8042 aux' has been unregistered [ 20.503535] PNP: No PS/2 controller found. Probing ports directly. [ 20.522990] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 20.522990] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 20.546990] mice: PS/2 mouse device common for all mice [ 20.546990] pnp: the driver 'rtc_cmos' has been registered [ 20.546990] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 20.546990] rtc0: alarms up to one year, y3k [ 20.546990] rtc_cmos 00:05: driver attached [ 20.546990] cpuidle: using governor ladder [ 20.546990] cpuidle: using governor menu [ 20.546990] No iBFT detected. [ 20.546990] TCP cubic registered [ 20.546990] NET: Registered protocol family 17 [ 20.546990] registered taskstats version 1 [ 20.546990] rtc_cmos 00:05: setting system clock to 2010-04-21 16:05:48 UTC (1271865948) [ 20.546990] Freeing unused kernel memory: 392k freed [ 20.590278] ACPI: SSDT CBE5FC18, 02CC (r1 AMI IST 1 MSFT 3000001) [ 20.594358] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 20.594358] ACPI: ACPI0007:00 is registered as cooling_device0 [ 20.594358] Marking TSC unstable due to TSC halts in idle [ 20.594408] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 20.594420] ACPI: ACPI0007:01 is registered as cooling_device1 [ 20.711379] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 [ 20.711379] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 20.711379] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 20.711379] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 20.713893] USB Universal Host Controller Interface driver v3.0 [ 20.727379] No dock devices found. [ 20.731379] SCSI subsystem initialized [ 20.735710] libata version 3.00 loaded. [ 20.800738] eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:b0:31:1b [ 20.800738] eth0: Intel(R) PRO/1000 Network Connection [ 20.800738] eth0: MAC: 6, PHY: 8, PBA No: ffffff-0ff [ 20.800738] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 20.800738] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 20.800738] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 20.800738] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 20.800738] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0a0 [ 20.800738] usb usb1: configuration #1 chosen from 1 choice [ 20.800738] hub 1-0:1.0: USB hub found [ 20.800738] hub 1-0:1.0: 2 ports detected [ 20.902009] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 20.902011] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 20.902012] usb usb1: Product: UHCI Host Controller [ 20.902013] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd [ 20.902014] usb usb1: SerialNumber: 0000:00:1a.0 [ 20.902158] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 20.902158] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 20.902158] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 20.902158] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 20.902158] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f080 [ 20.902158] usb usb2: configuration #1 chosen from 1 choice [ 20.902158] hub 2-0:1.0: USB hub found [ 20.902158] hub 2-0:1.0: 2 ports detected [ 21.004809] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 21.004811] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.004812] usb usb2: Product: UHCI Host Controller [ 21.004813] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd [ 21.004814] usb usb2: SerialNumber: 0000:00:1a.1 [ 21.006171] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 21.006171] PCI: Setting latency timer of device 0000:00:1a.2 to 64 [ 21.006171] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 21.006171] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 21.006171] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f060 [ 21.006171] usb usb3: configuration #1 chosen from 1 choice [ 21.006171] hub 3-0:1.0: USB hub found [ 21.006171] hub 3-0:1.0: 2 ports detected [ 21.109040] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 21.109041] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.109043] usb usb3: Product: UHCI Host Controller [ 21.109044] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd [ 21.109045] usb usb3: SerialNumber: 0000:00:1a.2 [ 21.110176] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 21.110176] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 21.110176] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 21.110176] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4 [ 21.114245] ehci_hcd 0000:00:1a.7: debug port 1 [ 21.114245] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 21.114245] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe1c25400 [ 21.130280] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 21.130308] usb usb4: configuration #1 chosen from 1 choice [ 21.130322] hub 4-0:1.0: USB hub found [ 21.130325] hub 4-0:1.0: 6 ports detected [ 21.234139] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 21.234141] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.234142] usb usb4: Product: EHCI Host Controller [ 21.234143] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd [ 21.237838] usb usb4: SerialNumber: 0000:00:1a.7 [ 21.237838] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 21.237838] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 21.237838] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 21.237838] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 21.237838] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f040 [ 21.237838] usb usb5: configuration #1 chosen from 1 choice [ 21.237838] hub 5-0:1.0: USB hub found [ 21.237838] hub 5-0:1.0: 2 ports detected [ 21.342645] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 21.342647] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.342648] usb usb5: Product: UHCI Host Controller [ 21.342649] usb usb5: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd [ 21.342650] usb usb5: SerialNumber: 0000:00:1d.0 [ 21.342863] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 21.342863] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 21.342863] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 21.342863] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 21.342863] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f020 [ 21.342863] usb usb6: configuration #1 chosen from 1 choice [ 21.342863] hub 6-0:1.0: USB hub found [ 21.342863] hub 6-0:1.0: 2 ports detected [ 21.350561] Clocksource tsc unstable (delta = -407031623 ns) [ 21.446327] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 21.446329] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.446330] usb usb6: Product: UHCI Host Controller [ 21.446331] usb usb6: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd [ 21.446332] usb usb6: SerialNumber: 0000:00:1d.1 [ 21.446863] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 21.446863] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 21.446863] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 21.446863] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 21.446863] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f000 [ 21.446863] usb usb7: configuration #1 chosen from 1 choice [ 21.446863] hub 7-0:1.0: USB hub found [ 21.446863] hub 7-0:1.0: 2 ports detected [ 21.550339] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 21.550341] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.550342] usb usb7: Product: UHCI Host Controller [ 21.550343] usb usb7: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd [ 21.550344] usb usb7: SerialNumber: 0000:00:1d.2 [ 21.550291] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 21.550291] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 21.550291] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 21.550291] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 21.554634] ehci_hcd 0000:00:1d.7: debug port 1 [ 21.554634] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 21.554634] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe1c25000 [ 21.571115] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 21.571143] usb usb8: configuration #1 chosen from 1 choice [ 21.571157] hub 8-0:1.0: USB hub found [ 21.571161] hub 8-0:1.0: 6 ports detected [ 21.674525] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 21.674527] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.674528] usb usb8: Product: EHCI Host Controller [ 21.674529] usb usb8: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd [ 21.678254] usb usb8: SerialNumber: 0000:00:1d.7 [ 21.678254] sata_sil24 0000:03:00.0: version 1.1 [ 21.678254] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 21.678254] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 21.678254] scsi0 : sata_sil24 [ 21.678254] scsi1 : sata_sil24 [ 21.678254] ata1: SATA max UDMA/100 host m128@0xe1b84000 port 0xe1b80000 irq 18 [ 21.678254] ata2: SATA max UDMA/100 host m128@0xe1b84000 port 0xe1b82000 irq 18 [ 23.754769] ata1: SATA link down (SStatus 0 SControl 0) [ 25.954787] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 25.957977] ata2.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 [ 25.957977] ata2.00: hard resetting link [ 26.278308] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 26.278311] ata2.01: hard resetting link [ 26.600474] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 26.600474] ata2.02: hard resetting link [ 26.920640] ata2.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 26.920643] ata2.03: hard resetting link [ 27.240249] ata2.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 27.240249] ata2.04: hard resetting link [ 27.560636] ata2.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 27.560639] ata2.05: hard resetting link [ 27.880642] ata2.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 27.895564] ata2.00: HPA detected: current 2930277168, native 18446744072344861488 [ 27.895564] ata2.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 27.895564] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 27.899870] ata2.00: configured for UDMA/100 [ 28.389874] ata2.01: HPA detected: current 2930277168, native 18446744072344861488 [ 28.389874] ata2.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 28.389874] ata2.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 28.392674] ata2.01: configured for UDMA/100 [ 28.869531] ata2.02: HPA detected: current 2930277168, native 18446744072344861488 [ 28.869531] ata2.02: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 28.869531] ata2.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 28.898681] ata2.02: configured for UDMA/100 [ 29.371905] ata2.03: HPA detected: current 2930277168, native 18446744072344861488 [ 29.371905] ata2.03: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 29.371905] ata2.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 29.372684] ata2.03: configured for UDMA/100 [ 29.848174] ata2.04: HPA detected: current 2930277168, native 18446744072344861488 [ 29.848174] ata2.04: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 29.848174] ata2.04: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 29.851260] ata2.04: configured for UDMA/100 [ 29.851307] ata2: EH complete [ 29.851260] scsi 1:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 29.851260] scsi 1:1:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 29.851260] scsi 1:2:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 29.851260] scsi 1:3:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 29.851260] scsi 1:4:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 29.856178] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 29.856178] scsi2 : sata_sil24 [ 29.856178] scsi3 : sata_sil24 [ 29.856178] scsi4 : sata_sil24 [ 29.856178] scsi5 : sata_sil24 [ 29.856178] ata3: SATA max UDMA/100 host m128@0xe1911200 port 0xe1908000 irq 20 [ 29.856178] ata4: SATA max UDMA/100 host m128@0xe1911200 port 0xe190a000 irq 20 [ 29.856178] ata5: SATA max UDMA/100 host m128@0xe1911200 port 0xe190c000 irq 20 [ 29.856178] ata6: SATA max UDMA/100 host m128@0xe1911200 port 0xe190e000 irq 20 [ 32.055880] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 32.056111] ata3.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 [ 32.060278] ata3.00: hard resetting link [ 32.378802] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 32.378802] ata3.01: hard resetting link [ 32.698554] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 32.698554] ata3.02: hard resetting link [ 33.017546] ata3.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 33.017547] ata3.03: hard resetting link [ 33.338861] ata3.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 33.338862] ata3.04: hard resetting link [ 33.658638] ata3.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 33.658638] ata3.05: hard resetting link [ 33.981594] ata3.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 33.983513] ata3.00: HPA detected: current 2930277168, native 18446744072344861488 [ 33.983513] ata3.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 33.983513] ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 33.985925] ata3.00: configured for UDMA/100 [ 33.988054] ata3.01: HPA detected: current 2930277168, native 18446744072344861488 [ 33.988054] ata3.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 33.988054] ata3.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 33.989828] ata3.01: configured for UDMA/100 [ 33.991644] ata3.02: HPA detected: current 2930277168, native 18446744072344861488 [ 33.991644] ata3.02: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 33.991644] ata3.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 33.991644] ata3.02: configured for UDMA/100 [ 33.993312] ata3.03: HPA detected: current 2930277168, native 18446744072344861488 [ 33.993312] ata3.03: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 33.993312] ata3.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 33.996864] ata3.03: configured for UDMA/100 [ 33.999002] ata3.04: HPA detected: current 2930277168, native 18446744072344861488 [ 33.999002] ata3.04: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 33.999002] ata3.04: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 34.009511] ata3.04: configured for UDMA/100 [ 34.009533] ata3: EH complete [ 36.205111] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 36.205089] ata4.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 [ 36.205551] ata4.00: hard resetting link [ 36.525333] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 36.525335] ata4.01: hard resetting link [ 36.846341] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 36.846341] ata4.02: hard resetting link [ 37.166099] ata4.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 37.166099] ata4.03: hard resetting link [ 37.486338] ata4.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 37.486338] ata4.04: hard resetting link [ 37.806401] ata4.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 37.806403] ata4.05: hard resetting link [ 38.126474] ata4.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 38.129647] ata4.00: HPA detected: current 2930277168, native 18446744072344861488 [ 38.129649] ata4.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 38.129651] ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 38.133682] ata4.00: configured for UDMA/100 [ 38.135318] ata4.01: HPA detected: current 2930277168, native 18446744072344861488 [ 38.135318] ata4.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 38.135318] ata4.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 38.135603] ata4.01: configured for UDMA/100 [ 38.137806] ata4.02: HPA detected: current 2930277168, native 18446744072344861488 [ 38.137806] ata4.02: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 38.137806] ata4.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 38.141471] ata4.02: configured for UDMA/100 [ 38.143093] ata4.03: HPA detected: current 2930277168, native 18446744072344861488 [ 38.143093] ata4.03: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 38.143093] ata4.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 38.143093] ata4.03: configured for UDMA/100 [ 38.145244] ata4.04: HPA detected: current 2930277168, native 18446744072344861488 [ 38.145244] ata4.04: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 38.145244] ata4.04: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 38.149127] ata4.04: configured for UDMA/100 [ 38.149162] ata4: EH complete [ 40.349747] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 40.349725] ata5.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 [ 40.350218] ata5.00: hard resetting link [ 40.671370] ata5.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 40.671372] ata5.01: hard resetting link [ 40.989970] ata5.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 40.989971] ata5.02: hard resetting link [ 41.311373] ata5.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 41.311375] ata5.03: hard resetting link [ 41.631281] ata5.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 41.631281] ata5.04: hard resetting link [ 41.951295] ata5.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 41.951295] ata5.05: hard resetting link [ 42.271352] ata5.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 42.280216] ata5.00: HPA detected: current 2930277168, native 18446744072344861488 [ 42.280216] ata5.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 42.280216] ata5.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 42.283319] ata5.00: configured for UDMA/100 [ 42.760323] ata5.01: HPA detected: current 2930277168, native 18446744072344861488 [ 42.760323] ata5.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 42.760323] ata5.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 42.763634] ata5.01: configured for UDMA/100 [ 43.243528] ata5.02: HPA detected: current 2930277168, native 18446744072344861488 [ 43.243528] ata5.02: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 43.243528] ata5.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 43.246061] ata5.02: configured for UDMA/100 [ 43.715347] ata5.03: HPA detected: current 2930277168, native 18446744072344861488 [ 43.715347] ata5.03: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 43.715347] ata5.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 43.743756] ata5.03: configured for UDMA/100 [ 44.222279] ata5.04: HPA detected: current 2930277168, native 18446744072344861488 [ 44.222279] ata5.04: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 44.222279] ata5.04: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 44.224877] ata5.04: configured for UDMA/100 [ 44.224911] ata5: EH complete [ 46.423217] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 46.423195] ata6.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 [ 46.423648] ata6.00: hard resetting link [ 46.745080] ata6.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 46.745083] ata6.01: hard resetting link [ 47.064934] ata6.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 47.064934] ata6.02: hard resetting link [ 47.384687] ata6.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 47.384687] ata6.03: hard resetting link [ 47.704846] ata6.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 47.704847] ata6.04: hard resetting link [ 48.025008] ata6.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 48.025009] ata6.05: hard resetting link [ 48.344715] ata6.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 48.823853] ata6.00: HPA detected: current 2930277168, native 18446744072344861488 [ 48.823853] ata6.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 48.823853] ata6.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 48.823853] ata6.00: configured for UDMA/100 [ 49.320223] ata6.01: HPA detected: current 2930277168, native 18446744072344861488 [ 49.320223] ata6.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 49.320223] ata6.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 49.349055] ata6.01: configured for UDMA/100 [ 49.825360] ata6.02: HPA detected: current 2930277168, native 18446744072344861488 [ 49.825360] ata6.02: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 49.825360] ata6.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 49.854261] ata6.02: configured for UDMA/100 [ 50.344558] ata6.03: HPA detected: current 2930277168, native 18446744072344861488 [ 50.344558] ata6.03: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 50.344558] ata6.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 50.373346] ata6.03: configured for UDMA/100 [ 50.837666] ata6.04: HPA detected: current 2930277168, native 18446744072344861488 [ 50.837666] ata6.04: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 50.837666] ata6.04: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 50.857020] ata6.04: configured for UDMA/100 [ 50.857053] ata6: EH complete [ 50.857020] scsi 2:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.857020] scsi 2:1:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.857020] scsi 2:2:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.857020] scsi 2:3:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.857020] scsi 2:4:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.857020] scsi 3:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.857020] scsi 3:1:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.857020] scsi 3:2:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.857020] scsi 3:3:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.857020] scsi 3:4:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.857020] scsi 4:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.857020] scsi 4:1:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.857020] scsi 4:2:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.857020] scsi 4:3:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.864776] scsi 4:4:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.864776] scsi 5:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.864776] scsi 5:1:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.864776] scsi 5:2:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.864776] scsi 5:3:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.864776] scsi 5:4:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 50.864776] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 50.864776] scsi6 : sata_sil24 [ 50.864776] scsi7 : sata_sil24 [ 50.864776] scsi8 : sata_sil24 [ 50.864776] scsi9 : sata_sil24 [ 50.864776] ata7: SATA max UDMA/100 host m128@0xe1911180 port 0xe1900000 irq 21 [ 50.864776] ata8: SATA max UDMA/100 host m128@0xe1911180 port 0xe1902000 irq 21 [ 50.864776] ata9: SATA max UDMA/100 host m128@0xe1911180 port 0xe1904000 irq 21 [ 50.864776] ata10: SATA max UDMA/100 host m128@0xe1911180 port 0xe1906000 irq 21 [ 53.066951] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 53.067185] ata7.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 [ 53.067185] ata7.00: hard resetting link [ 53.390199] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 53.390201] ata7.01: hard resetting link [ 53.709887] ata7.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 53.709887] ata7.02: hard resetting link [ 54.030210] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 54.030210] ata7.03: hard resetting link [ 54.350146] ata7.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 54.350146] ata7.04: hard resetting link [ 54.670208] ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 54.670211] ata7.05: hard resetting link [ 54.990442] ata7.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 54.992124] ata7.00: HPA detected: current 2930277168, native 18446744072344861488 [ 54.992126] ata7.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 54.992128] ata7.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 54.993483] ata7.00: configured for UDMA/100 [ 54.995097] ata7.01: HPA detected: current 2930277168, native 18446744072344861488 [ 54.995097] ata7.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 54.995097] ata7.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 54.995570] ata7.01: configured for UDMA/100 [ 54.997729] ata7.02: HPA detected: current 2930277168, native 18446744072344861488 [ 54.997729] ata7.02: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 54.997729] ata7.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 55.001134] ata7.02: configured for UDMA/100 [ 55.002807] ata7.03: HPA detected: current 2930277168, native 18446744072344861488 [ 55.002807] ata7.03: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 55.002807] ata7.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 55.002807] ata7.03: configured for UDMA/100 [ 55.004965] ata7.04: HPA detected: current 2930277168, native 18446744072344861488 [ 55.004965] ata7.04: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 55.004965] ata7.04: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 55.008861] ata7.04: configured for UDMA/100 [ 55.008897] ata7: EH complete [ 57.209446] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 57.209424] ata8.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 [ 57.209924] ata8.00: hard resetting link [ 57.532596] ata8.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 57.532596] ata8.01: hard resetting link [ 57.852766] ata8.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 57.852767] ata8.02: hard resetting link [ 58.172905] ata8.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 58.172906] ata8.03: hard resetting link [ 58.492725] ata8.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 58.492725] ata8.04: hard resetting link [ 58.812846] ata8.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 58.812846] ata8.05: hard resetting link [ 59.132796] ata8.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 59.134672] ata8.00: HPA detected: current 2930277168, native 18446744072344861488 [ 59.134672] ata8.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 59.134672] ata8.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 59.136798] ata8.00: configured for UDMA/100 [ 59.138715] ata8.01: HPA detected: current 2930277168, native 18446744072344861488 [ 59.138715] ata8.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 59.138715] ata8.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 59.143073] ata8.01: configured for UDMA/100 [ 59.147123] ata8.02: HPA detected: current 2930277168, native 18446744072344861488 [ 59.147123] ata8.02: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 59.147123] ata8.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 59.149060] ata8.02: configured for UDMA/100 [ 59.151234] ata8.03: HPA detected: current 2930277168, native 18446744072344861488 [ 59.151234] ata8.03: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 59.151234] ata8.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 59.153377] ata8.03: configured for UDMA/100 [ 59.155527] ata8.04: HPA detected: current 2930277168, native 18446744072344861488 [ 59.155527] ata8.04: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 59.155527] ata8.04: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 59.157697] ata8.04: configured for UDMA/100 [ 59.157700] ata8: EH complete [ 61.354637] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 61.354615] ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 [ 61.355102] ata9.00: hard resetting link [ 61.678393] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 61.678393] ata9.01: hard resetting link [ 61.998138] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 61.998138] ata9.02: hard resetting link [ 62.318391] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 62.318391] ata9.03: hard resetting link [ 62.638459] ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 62.638461] ata9.04: hard resetting link [ 62.958247] ata9.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 62.958248] ata9.05: hard resetting link [ 63.278405] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 63.281053] ata9.00: HPA detected: current 2930277168, native 18446744072344861488 [ 63.281053] ata9.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 63.281053] ata9.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 63.284013] ata9.00: configured for UDMA/100 [ 63.285305] ata9.01: HPA detected: current 2930277168, native 18446744072344861488 [ 63.285305] ata9.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 63.285305] ata9.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 63.286760] ata9.01: configured for UDMA/100 [ 63.288677] ata9.02: HPA detected: current 2930277168, native 18446744072344861488 [ 63.288677] ata9.02: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 63.288677] ata9.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 63.290580] ata9.02: configured for UDMA/100 [ 63.292703] ata9.03: HPA detected: current 2930277168, native 18446744072344861488 [ 63.292703] ata9.03: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 63.292703] ata9.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 63.294878] ata9.03: configured for UDMA/100 [ 63.297052] ata9.04: HPA detected: current 2930277168, native 18446744072344861488 [ 63.297052] ata9.04: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 63.297052] ata9.04: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 63.299267] ata9.04: configured for UDMA/100 [ 63.299299] ata9: EH complete [ 65.498011] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 65.497989] ata10.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 [ 65.498062] ata10.00: hard resetting link [ 65.818248] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 65.818250] ata10.01: hard resetting link [ 66.141524] ata10.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 66.141526] ata10.02: hard resetting link [ 66.461227] ata10.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 66.461227] ata10.03: hard resetting link [ 66.781450] ata10.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 66.781450] ata10.04: hard resetting link [ 67.101545] ata10.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 67.101547] ata10.05: hard resetting link [ 67.421335] ata10.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 67.422984] ata10.00: HPA detected: current 2930277168, native 18446744072344861488 [ 67.422986] ata10.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 67.422987] ata10.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 67.424724] ata10.00: configured for UDMA/100 [ 67.426353] ata10.01: HPA detected: current 2930277168, native 18446744072344861488 [ 67.426353] ata10.01: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 67.426353] ata10.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 67.428021] ata10.01: configured for UDMA/100 [ 67.429870] ata10.02: HPA detected: current 2930277168, native 18446744072344861488 [ 67.429870] ata10.02: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 67.429870] ata10.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 67.431800] ata10.02: configured for UDMA/100 [ 67.433979] ata10.03: HPA detected: current 2930277168, native 18446744072344861488 [ 67.433979] ata10.03: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 67.433979] ata10.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 67.436169] ata10.03: configured for UDMA/100 [ 67.438381] ata10.04: HPA detected: current 2930277168, native 18446744072344861488 [ 67.438381] ata10.04: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 67.438381] ata10.04: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 67.440639] ata10.04: configured for UDMA/100 [ 67.440671] ata10: EH complete [ 67.440671] scsi 6:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 6:1:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 6:2:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 6:3:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 6:4:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 7:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 7:1:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 7:2:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 7:3:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 7:4:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 8:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 8:1:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 8:2:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 8:3:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 8:4:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 9:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 9:1:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 9:2:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 9:3:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.440671] scsi 9:4:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5 [ 67.442106] ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 67.495784] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[23] MMIO=[e1910000-e19107ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 67.504733] ata_piix 0000:00:1f.2: version 2.12 [ 67.504760] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 67.504764] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 67.504815] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 67.517208] scsi10 : ata_piix [ 67.517208] Uniform Multi-Platform E-IDE driver [ 67.517210] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 67.523734] scsi11 : ata_piix [ 67.523734] ata11: SATA max UDMA/133 cmd 0xf190 ctl 0xf180 bmdma 0xf150 irq 19 [ 67.523734] ata12: SATA max UDMA/133 cmd 0xf170 ctl 0xf160 bmdma 0xf158 irq 19 [ 67.523734] Driver 'sd' needs updating - please use bus_type methods [ 67.523734] sd 1:0:0:0: [sda] 2930277168 512-byte hardware sectors (1500302 MB) [ 67.523734] sd 1:0:0:0: [sda] Write Protect is off [ 67.523734] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 67.523734] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 67.523734] sd 1:0:0:0: [sda] 2930277168 512-byte hardware sectors (1500302 MB) [ 67.523734] sd 1:0:0:0: [sda] Write Protect is off [ 67.523734] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 67.523734] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 67.523734] sda:<6>ata11: SATA link down (SStatus 0 SControl 300) [ 68.003922] sda1 [ 68.003922] sd 1:0:0:0: [sda] Attached SCSI disk [ 68.003922] sd 1:1:0:0: [sdb] 2930277168 512-byte hardware sectors (1500302 MB) [ 68.003922] sd 1:1:0:0: [sdb] Write Protect is off [ 68.003922] sd 1:1:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 68.003922] sd 1:1:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 68.003922] sd 1:1:0:0: [sdb] 2930277168 512-byte hardware sectors (1500302 MB) [ 68.003922] sd 1:1:0:0: [sdb] Write Protect is off [ 68.003922] sd 1:1:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 68.003922] sd 1:1:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 68.003922] sdb:<6>ata12: SATA link down (SStatus 0 SControl 300) [ 68.180552] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19 [ 68.180552] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 68.180552] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 68.180571] scsi12 : ata_piix [ 68.180585] scsi13 : ata_piix [ 68.180585] ata13: SATA max UDMA/133 cmd 0xf130 ctl 0xf120 bmdma 0xf0f0 irq 19 [ 68.180585] ata14: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0f8 irq 19 [ 68.502697] sdb1 [ 68.511059] ata13: SATA link down (SStatus 0 SControl 300) [ 68.513679] sd 1:1:0:0: [sdb] Attached SCSI disk [ 68.513679] sd 1:2:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) [ 68.513679] sd 1:2:0:0: [sdc] Write Protect is off [ 68.513679] sd 1:2:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 68.513679] sd 1:2:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 68.513680] sd 1:2:0:0: [sdc] 2930277168 512-byte hardware sectors (1500302 MB) [ 68.513680] sd 1:2:0:0: [sdc] Write Protect is off [ 68.513680] sd 1:2:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 68.513680] sd 1:2:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 68.513680] sdc:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270002557c7f] [ 68.843518] ata14: SATA link down (SStatus 0 SControl 300) [ 68.843501] JMB: IDE controller (0x197b:0x2368 rev 0x00) at PCI slot 0000:04:00.0 [ 68.843501] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 68.843501] JMB: 100% native mode on irq 19 [ 68.843501] ide0: BM-DMA at 0xd000-0xd007 [ 68.843501] ide1: BM-DMA at 0xd008-0xd00f [ 68.843501] Probing IDE interface ide0... [ 69.011605] sdc1 [ 69.012007] sd 1:2:0:0: [sdc] Attached SCSI disk [ 69.012007] sd 1:3:0:0: [sdd] 2930277168 512-byte hardware sectors (1500302 MB) [ 69.012007] sd 1:3:0:0: [sdd] Write Protect is off [ 69.012007] sd 1:3:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 69.012007] sd 1:3:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 69.012007] sd 1:3:0:0: [sdd] 2930277168 512-byte hardware sectors (1500302 MB) [ 69.012007] sd 1:3:0:0: [sdd] Write Protect is off [ 69.012007] sd 1:3:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 69.012007] sd 1:3:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 69.012007] sdd:hda: WDC WD800AAJB-00J3A0, ATA DISK drive [ 69.468115] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 69.468420] hda: UDMA/133 mode selected [ 69.468729] Probing IDE interface ide1... [ 69.488010] sdd1 [ 69.488055] sd 1:3:0:0: [sdd] Attached SCSI disk [ 69.488092] sd 1:4:0:0: [sde] 2930277168 512-byte hardware sectors (1500302 MB) [ 69.488103] sd 1:4:0:0: [sde] Write Protect is off [ 69.488104] sd 1:4:0:0: [sde] Mode Sense: 00 3a 00 00 [ 69.488125] sd 1:4:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 69.488155] sd 1:4:0:0: [sde] 2930277168 512-byte hardware sectors (1500302 MB) [ 69.488166] sd 1:4:0:0: [sde] Write Protect is off [ 69.488167] sd 1:4:0:0: [sde] Mode Sense: 00 3a 00 00 [ 69.488187] sd 1:4:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 69.488189] sde: sde1 [ 69.965080] sd 1:4:0:0: [sde] Attached SCSI disk [ 69.965080] sd 2:0:0:0: [sdf] 2930277168 512-byte hardware sectors (1500302 MB) [ 69.965080] sd 2:0:0:0: [sdf] Write Protect is off [ 69.965080] sd 2:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 69.965080] sd 2:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 69.965080] sd 2:0:0:0: [sdf] 2930277168 512-byte hardware sectors (1500302 MB) [ 69.965080] sd 2:0:0:0: [sdf] Write Protect is off [ 69.965080] sd 2:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 69.965080] sd 2:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 69.965080] sdf:ide0 at 0xd040-0xd047,0xd032 on irq 19 [ 70.041341] ide1 at 0xd020-0xd027,0xd012 on irq 19 [ 70.048722] hda: max request size: 512KiB [ 70.053741] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63 [ 70.054654] hda: cache flushes supported [ 70.054676] hda: hda1 hda2 [ 70.444866] sdf1 [ 70.444866] sd 2:0:0:0: [sdf] Attached SCSI disk [ 70.444866] sd 2:1:0:0: [sdg] 2930277168 512-byte hardware sectors (1500302 MB) [ 70.444866] sd 2:1:0:0: [sdg] Write Protect is off [ 70.444866] sd 2:1:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 70.444866] sd 2:1:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 70.444866] sd 2:1:0:0: [sdg] 2930277168 512-byte hardware sectors (1500302 MB) [ 70.444866] sd 2:1:0:0: [sdg] Write Protect is off [ 70.444866] sd 2:1:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 70.444866] sd 2:1:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 70.444866] sdg: sdg1 [ 76.736458] sd 2:1:0:0: [sdg] Attached SCSI disk [ 76.736458] sd 2:2:0:0: [sdh] 2930277168 512-byte hardware sectors (1500302 MB) [ 76.736458] sd 2:2:0:0: [sdh] Write Protect is off [ 76.736458] sd 2:2:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 76.736458] sd 2:2:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 76.736458] sd 2:2:0:0: [sdh] 2930277168 512-byte hardware sectors (1500302 MB) [ 76.736458] sd 2:2:0:0: [sdh] Write Protect is off [ 76.736458] sd 2:2:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 76.736458] sd 2:2:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 76.736458] sdh: sdh1 [ 83.028567] sd 2:2:0:0: [sdh] Attached SCSI disk [ 83.028567] sd 2:3:0:0: [sdi] 2930277168 512-byte hardware sectors (1500302 MB) [ 83.028567] sd 2:3:0:0: [sdi] Write Protect is off [ 83.028567] sd 2:3:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 83.028567] sd 2:3:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 83.028567] sd 2:3:0:0: [sdi] 2930277168 512-byte hardware sectors (1500302 MB) [ 83.028567] sd 2:3:0:0: [sdi] Write Protect is off [ 83.028567] sd 2:3:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 83.028567] sd 2:3:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 83.028567] sdi: sdi1 [ 89.440204] sd 2:3:0:0: [sdi] Attached SCSI disk [ 89.440204] sd 2:4:0:0: [sdj] 2930277168 512-byte hardware sectors (1500302 MB) [ 89.440204] sd 2:4:0:0: [sdj] Write Protect is off [ 89.440204] sd 2:4:0:0: [sdj] Mode Sense: 00 3a 00 00 [ 89.440204] sd 2:4:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 89.440204] sd 2:4:0:0: [sdj] 2930277168 512-byte hardware sectors (1500302 MB) [ 89.440204] sd 2:4:0:0: [sdj] Write Protect is off [ 89.440204] sd 2:4:0:0: [sdj] Mode Sense: 00 3a 00 00 [ 89.440205] sd 2:4:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 89.440205] sdj: sdj1 [ 95.619341] sd 2:4:0:0: [sdj] Attached SCSI disk [ 95.619341] sd 3:0:0:0: [sdk] 2930277168 512-byte hardware sectors (1500302 MB) [ 95.619341] sd 3:0:0:0: [sdk] Write Protect is off [ 95.619341] sd 3:0:0:0: [sdk] Mode Sense: 00 3a 00 00 [ 95.619341] sd 3:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 95.619341] sd 3:0:0:0: [sdk] 2930277168 512-byte hardware sectors (1500302 MB) [ 95.619341] sd 3:0:0:0: [sdk] Write Protect is off [ 95.619341] sd 3:0:0:0: [sdk] Mode Sense: 00 3a 00 00 [ 95.619341] sd 3:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 95.619341] sdk: sdk1 [ 96.111429] sd 3:0:0:0: [sdk] Attached SCSI disk [ 96.111429] sd 3:1:0:0: [sdl] 2930277168 512-byte hardware sectors (1500302 MB) [ 96.111429] sd 3:1:0:0: [sdl] Write Protect is off [ 96.111429] sd 3:1:0:0: [sdl] Mode Sense: 00 3a 00 00 [ 96.111429] sd 3:1:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 96.111429] sd 3:1:0:0: [sdl] 2930277168 512-byte hardware sectors (1500302 MB) [ 96.111429] sd 3:1:0:0: [sdl] Write Protect is off [ 96.111429] sd 3:1:0:0: [sdl] Mode Sense: 00 3a 00 00 [ 96.111429] sd 3:1:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 96.111429] sdl: sdl1 [ 102.325433] sd 3:1:0:0: [sdl] Attached SCSI disk [ 102.325433] sd 3:2:0:0: [sdm] 2930277168 512-byte hardware sectors (1500302 MB) [ 102.325433] sd 3:2:0:0: [sdm] Write Protect is off [ 102.325433] sd 3:2:0:0: [sdm] Mode Sense: 00 3a 00 00 [ 102.325433] sd 3:2:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 102.325433] sd 3:2:0:0: [sdm] 2930277168 512-byte hardware sectors (1500302 MB) [ 102.325433] sd 3:2:0:0: [sdm] Write Protect is off [ 102.325433] sd 3:2:0:0: [sdm] Mode Sense: 00 3a 00 00 [ 102.325433] sd 3:2:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 102.325433] sdm: sdm1 [ 108.523094] sd 3:2:0:0: [sdm] Attached SCSI disk [ 108.523094] sd 3:3:0:0: [sdn] 2930277168 512-byte hardware sectors (1500302 MB) [ 108.523094] sd 3:3:0:0: [sdn] Write Protect is off [ 108.523094] sd 3:3:0:0: [sdn] Mode Sense: 00 3a 00 00 [ 108.523094] sd 3:3:0:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 108.523094] sd 3:3:0:0: [sdn] 2930277168 512-byte hardware sectors (1500302 MB) [ 108.523094] sd 3:3:0:0: [sdn] Write Protect is off [ 108.523094] sd 3:3:0:0: [sdn] Mode Sense: 00 3a 00 00 [ 108.523094] sd 3:3:0:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 108.523094] sdn: sdn1 [ 115.032053] sd 3:3:0:0: [sdn] Attached SCSI disk [ 115.032053] sd 3:4:0:0: [sdo] 2930277168 512-byte hardware sectors (1500302 MB) [ 115.032053] sd 3:4:0:0: [sdo] Write Protect is off [ 115.032053] sd 3:4:0:0: [sdo] Mode Sense: 00 3a 00 00 [ 115.032053] sd 3:4:0:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 115.032053] sd 3:4:0:0: [sdo] 2930277168 512-byte hardware sectors (1500302 MB) [ 115.032053] sd 3:4:0:0: [sdo] Write Protect is off [ 115.032053] sd 3:4:0:0: [sdo] Mode Sense: 00 3a 00 00 [ 115.032053] sd 3:4:0:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 115.032053] sdo: sdo1 [ 121.348240] sd 3:4:0:0: [sdo] Attached SCSI disk [ 121.348241] sd 4:0:0:0: [sdp] 2930277168 512-byte hardware sectors (1500302 MB) [ 121.348241] sd 4:0:0:0: [sdp] Write Protect is off [ 121.348241] sd 4:0:0:0: [sdp] Mode Sense: 00 3a 00 00 [ 121.348241] sd 4:0:0:0: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 121.348241] sd 4:0:0:0: [sdp] 2930277168 512-byte hardware sectors (1500302 MB) [ 121.348241] sd 4:0:0:0: [sdp] Write Protect is off [ 121.348241] sd 4:0:0:0: [sdp] Mode Sense: 00 3a 00 00 [ 121.348241] sd 4:0:0:0: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 121.348241] sdp: sdp1 [ 121.830863] sd 4:0:0:0: [sdp] Attached SCSI disk [ 121.830863] sd 4:1:0:0: [sdq] 2930277168 512-byte hardware sectors (1500302 MB) [ 121.830863] sd 4:1:0:0: [sdq] Write Protect is off [ 121.830863] sd 4:1:0:0: [sdq] Mode Sense: 00 3a 00 00 [ 121.830863] sd 4:1:0:0: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 121.830863] sd 4:1:0:0: [sdq] 2930277168 512-byte hardware sectors (1500302 MB) [ 121.830863] sd 4:1:0:0: [sdq] Write Protect is off [ 121.830863] sd 4:1:0:0: [sdq] Mode Sense: 00 3a 00 00 [ 121.830863] sd 4:1:0:0: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 121.830863] sdq: sdq1 [ 122.323845] sd 4:1:0:0: [sdq] Attached SCSI disk [ 122.323845] sd 4:2:0:0: [sdr] 2930277168 512-byte hardware sectors (1500302 MB) [ 122.323845] sd 4:2:0:0: [sdr] Write Protect is off [ 122.323845] sd 4:2:0:0: [sdr] Mode Sense: 00 3a 00 00 [ 122.323845] sd 4:2:0:0: [sdr] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 122.323845] sd 4:2:0:0: [sdr] 2930277168 512-byte hardware sectors (1500302 MB) [ 122.323845] sd 4:2:0:0: [sdr] Write Protect is off [ 122.323845] sd 4:2:0:0: [sdr] Mode Sense: 00 3a 00 00 [ 122.323845] sd 4:2:0:0: [sdr] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 122.323845] sdr: sdr1 [ 122.808938] sd 4:2:0:0: [sdr] Attached SCSI disk [ 122.808938] sd 4:3:0:0: [sds] 2930277168 512-byte hardware sectors (1500302 MB) [ 122.808938] sd 4:3:0:0: [sds] Write Protect is off [ 122.808938] sd 4:3:0:0: [sds] Mode Sense: 00 3a 00 00 [ 122.808938] sd 4:3:0:0: [sds] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 122.808938] sd 4:3:0:0: [sds] 2930277168 512-byte hardware sectors (1500302 MB) [ 122.808938] sd 4:3:0:0: [sds] Write Protect is off [ 122.808938] sd 4:3:0:0: [sds] Mode Sense: 00 3a 00 00 [ 122.808938] sd 4:3:0:0: [sds] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 122.808938] sds: sds1 [ 123.276684] sd 4:3:0:0: [sds] Attached SCSI disk [ 123.276684] sd 4:4:0:0: [sdt] 2930277168 512-byte hardware sectors (1500302 MB) [ 123.276684] sd 4:4:0:0: [sdt] Write Protect is off [ 123.276684] sd 4:4:0:0: [sdt] Mode Sense: 00 3a 00 00 [ 123.276684] sd 4:4:0:0: [sdt] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 123.276684] sd 4:4:0:0: [sdt] 2930277168 512-byte hardware sectors (1500302 MB) [ 123.276684] sd 4:4:0:0: [sdt] Write Protect is off [ 123.276684] sd 4:4:0:0: [sdt] Mode Sense: 00 3a 00 00 [ 123.276684] sd 4:4:0:0: [sdt] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 123.276684] sdt: sdt1 [ 123.745770] sd 4:4:0:0: [sdt] Attached SCSI disk [ 123.745770] sd 5:0:0:0: [sdu] 2930277168 512-byte hardware sectors (1500302 MB) [ 123.745770] sd 5:0:0:0: [sdu] Write Protect is off [ 123.745770] sd 5:0:0:0: [sdu] Mode Sense: 00 3a 00 00 [ 123.745770] sd 5:0:0:0: [sdu] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 123.745770] sd 5:0:0:0: [sdu] 2930277168 512-byte hardware sectors (1500302 MB) [ 123.745770] sd 5:0:0:0: [sdu] Write Protect is off [ 123.745770] sd 5:0:0:0: [sdu] Mode Sense: 00 3a 00 00 [ 123.745770] sd 5:0:0:0: [sdu] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 123.745770] sdu: sdu1 [ 124.221494] sd 5:0:0:0: [sdu] Attached SCSI disk [ 124.221494] sd 5:1:0:0: [sdv] 2930277168 512-byte hardware sectors (1500302 MB) [ 124.221494] sd 5:1:0:0: [sdv] Write Protect is off [ 124.221494] sd 5:1:0:0: [sdv] Mode Sense: 00 3a 00 00 [ 124.221494] sd 5:1:0:0: [sdv] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 124.221494] sd 5:1:0:0: [sdv] 2930277168 512-byte hardware sectors (1500302 MB) [ 124.221494] sd 5:1:0:0: [sdv] Write Protect is off [ 124.221494] sd 5:1:0:0: [sdv] Mode Sense: 00 3a 00 00 [ 124.221494] sd 5:1:0:0: [sdv] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 124.221494] sdv: sdv1 [ 124.698097] sd 5:1:0:0: [sdv] Attached SCSI disk [ 124.698097] sd 5:2:0:0: [sdw] 2930277168 512-byte hardware sectors (1500302 MB) [ 124.698097] sd 5:2:0:0: [sdw] Write Protect is off [ 124.698097] sd 5:2:0:0: [sdw] Mode Sense: 00 3a 00 00 [ 124.698097] sd 5:2:0:0: [sdw] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 124.698097] sd 5:2:0:0: [sdw] 2930277168 512-byte hardware sectors (1500302 MB) [ 124.698097] sd 5:2:0:0: [sdw] Write Protect is off [ 124.698097] sd 5:2:0:0: [sdw] Mode Sense: 00 3a 00 00 [ 124.698097] sd 5:2:0:0: [sdw] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 124.698097] sdw: sdw1 [ 125.185730] sd 5:2:0:0: [sdw] Attached SCSI disk [ 125.185730] sd 5:3:0:0: [sdx] 2930277168 512-byte hardware sectors (1500302 MB) [ 125.185730] sd 5:3:0:0: [sdx] Write Protect is off [ 125.185730] sd 5:3:0:0: [sdx] Mode Sense: 00 3a 00 00 [ 125.185730] sd 5:3:0:0: [sdx] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 125.185730] sd 5:3:0:0: [sdx] 2930277168 512-byte hardware sectors (1500302 MB) [ 125.185730] sd 5:3:0:0: [sdx] Write Protect is off [ 125.185730] sd 5:3:0:0: [sdx] Mode Sense: 00 3a 00 00 [ 125.185730] sd 5:3:0:0: [sdx] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 125.185730] sdx: sdx1 [ 125.655168] sd 5:3:0:0: [sdx] Attached SCSI disk [ 125.655168] sd 5:4:0:0: [sdy] 2930277168 512-byte hardware sectors (1500302 MB) [ 125.655168] sd 5:4:0:0: [sdy] Write Protect is off [ 125.655168] sd 5:4:0:0: [sdy] Mode Sense: 00 3a 00 00 [ 125.655168] sd 5:4:0:0: [sdy] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 125.655168] sd 5:4:0:0: [sdy] 2930277168 512-byte hardware sectors (1500302 MB) [ 125.655168] sd 5:4:0:0: [sdy] Write Protect is off [ 125.655168] sd 5:4:0:0: [sdy] Mode Sense: 00 3a 00 00 [ 125.655168] sd 5:4:0:0: [sdy] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 125.655168] sdy: sdy1 [ 126.119267] sd 5:4:0:0: [sdy] Attached SCSI disk [ 126.119267] sd 6:0:0:0: [sdz] 2930277168 512-byte hardware sectors (1500302 MB) [ 126.119267] sd 6:0:0:0: [sdz] Write Protect is off [ 126.119267] sd 6:0:0:0: [sdz] Mode Sense: 00 3a 00 00 [ 126.119267] sd 6:0:0:0: [sdz] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 126.119267] sd 6:0:0:0: [sdz] 2930277168 512-byte hardware sectors (1500302 MB) [ 126.119267] sd 6:0:0:0: [sdz] Write Protect is off [ 126.119267] sd 6:0:0:0: [sdz] Mode Sense: 00 3a 00 00 [ 126.119267] sd 6:0:0:0: [sdz] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 126.119267] sdz: sdz1 [ 126.588018] sd 6:0:0:0: [sdz] Attached SCSI disk [ 126.588018] sd 6:1:0:0: [sdaa] 2930277168 512-byte hardware sectors (1500302 MB) [ 126.588018] sd 6:1:0:0: [sdaa] Write Protect is off [ 126.588018] sd 6:1:0:0: [sdaa] Mode Sense: 00 3a 00 00 [ 126.588018] sd 6:1:0:0: [sdaa] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 126.588018] sd 6:1:0:0: [sdaa] 2930277168 512-byte hardware sectors (1500302 MB) [ 126.588018] sd 6:1:0:0: [sdaa] Write Protect is off [ 126.588018] sd 6:1:0:0: [sdaa] Mode Sense: 00 3a 00 00 [ 126.588019] sd 6:1:0:0: [sdaa] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 126.588019] sdaa: sdaa1 [ 132.972685] sd 6:1:0:0: [sdaa] Attached SCSI disk [ 132.972685] sd 6:2:0:0: [sdab] 2930277168 512-byte hardware sectors (1500302 MB) [ 132.972685] sd 6:2:0:0: [sdab] Write Protect is off [ 132.972685] sd 6:2:0:0: [sdab] Mode Sense: 00 3a 00 00 [ 132.972685] sd 6:2:0:0: [sdab] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 132.972685] sd 6:2:0:0: [sdab] 2930277168 512-byte hardware sectors (1500302 MB) [ 132.972685] sd 6:2:0:0: [sdab] Write Protect is off [ 132.972685] sd 6:2:0:0: [sdab] Mode Sense: 00 3a 00 00 [ 132.972685] sd 6:2:0:0: [sdab] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 132.972685] sdab: sdab1 [ 139.290201] sd 6:2:0:0: [sdab] Attached SCSI disk [ 139.290201] sd 6:3:0:0: [sdac] 2930277168 512-byte hardware sectors (1500302 MB) [ 139.290201] sd 6:3:0:0: [sdac] Write Protect is off [ 139.290201] sd 6:3:0:0: [sdac] Mode Sense: 00 3a 00 00 [ 139.290201] sd 6:3:0:0: [sdac] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 139.290201] sd 6:3:0:0: [sdac] 2930277168 512-byte hardware sectors (1500302 MB) [ 139.290201] sd 6:3:0:0: [sdac] Write Protect is off [ 139.290201] sd 6:3:0:0: [sdac] Mode Sense: 00 3a 00 00 [ 139.290201] sd 6:3:0:0: [sdac] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 139.290201] sdac: sdac1 [ 145.587163] sd 6:3:0:0: [sdac] Attached SCSI disk [ 145.587163] sd 6:4:0:0: [sdad] 2930277168 512-byte hardware sectors (1500302 MB) [ 145.587163] sd 6:4:0:0: [sdad] Write Protect is off [ 145.587163] sd 6:4:0:0: [sdad] Mode Sense: 00 3a 00 00 [ 145.587163] sd 6:4:0:0: [sdad] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 145.587163] sd 6:4:0:0: [sdad] 2930277168 512-byte hardware sectors (1500302 MB) [ 145.587163] sd 6:4:0:0: [sdad] Write Protect is off [ 145.587163] sd 6:4:0:0: [sdad] Mode Sense: 00 3a 00 00 [ 145.587163] sd 6:4:0:0: [sdad] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 145.587163] sdad: sdad1 [ 151.873846] sd 6:4:0:0: [sdad] Attached SCSI disk [ 151.873846] sd 7:0:0:0: [sdae] 2930277168 512-byte hardware sectors (1500302 MB) [ 151.873846] sd 7:0:0:0: [sdae] Write Protect is off [ 151.873846] sd 7:0:0:0: [sdae] Mode Sense: 00 3a 00 00 [ 151.873846] sd 7:0:0:0: [sdae] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 151.873846] sd 7:0:0:0: [sdae] 2930277168 512-byte hardware sectors (1500302 MB) [ 151.873846] sd 7:0:0:0: [sdae] Write Protect is off [ 151.873846] sd 7:0:0:0: [sdae] Mode Sense: 00 3a 00 00 [ 151.873846] sd 7:0:0:0: [sdae] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 151.873846] sdae: sdae1 [ 152.347143] sd 7:0:0:0: [sdae] Attached SCSI disk [ 152.347143] sd 7:1:0:0: [sdaf] 2930277168 512-byte hardware sectors (1500302 MB) [ 152.347143] sd 7:1:0:0: [sdaf] Write Protect is off [ 152.347143] sd 7:1:0:0: [sdaf] Mode Sense: 00 3a 00 00 [ 152.347143] sd 7:1:0:0: [sdaf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 152.347143] sd 7:1:0:0: [sdaf] 2930277168 512-byte hardware sectors (1500302 MB) [ 152.347143] sd 7:1:0:0: [sdaf] Write Protect is off [ 152.347143] sd 7:1:0:0: [sdaf] Mode Sense: 00 3a 00 00 [ 152.347143] sd 7:1:0:0: [sdaf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 152.347143] sdaf: sdaf1 [ 158.638646] sd 7:1:0:0: [sdaf] Attached SCSI disk [ 158.638646] sd 7:2:0:0: [sdag] 2930277168 512-byte hardware sectors (1500302 MB) [ 158.638646] sd 7:2:0:0: [sdag] Write Protect is off [ 158.638646] sd 7:2:0:0: [sdag] Mode Sense: 00 3a 00 00 [ 158.638646] sd 7:2:0:0: [sdag] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 158.638647] sd 7:2:0:0: [sdag] 2930277168 512-byte hardware sectors (1500302 MB) [ 158.638647] sd 7:2:0:0: [sdag] Write Protect is off [ 158.638647] sd 7:2:0:0: [sdag] Mode Sense: 00 3a 00 00 [ 158.638647] sd 7:2:0:0: [sdag] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 158.638647] sdag: sdag1 [ 164.954829] sd 7:2:0:0: [sdag] Attached SCSI disk [ 164.954829] sd 7:3:0:0: [sdah] 2930277168 512-byte hardware sectors (1500302 MB) [ 164.954829] sd 7:3:0:0: [sdah] Write Protect is off [ 164.954829] sd 7:3:0:0: [sdah] Mode Sense: 00 3a 00 00 [ 164.954829] sd 7:3:0:0: [sdah] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 164.954829] sd 7:3:0:0: [sdah] 2930277168 512-byte hardware sectors (1500302 MB) [ 164.954829] sd 7:3:0:0: [sdah] Write Protect is off [ 164.954829] sd 7:3:0:0: [sdah] Mode Sense: 00 3a 00 00 [ 164.954829] sd 7:3:0:0: [sdah] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 164.954829] sdah: sdah1 [ 171.405207] sd 7:3:0:0: [sdah] Attached SCSI disk [ 171.405207] sd 7:4:0:0: [sdai] 2930277168 512-byte hardware sectors (1500302 MB) [ 171.405207] sd 7:4:0:0: [sdai] Write Protect is off [ 171.405207] sd 7:4:0:0: [sdai] Mode Sense: 00 3a 00 00 [ 171.405207] sd 7:4:0:0: [sdai] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 171.405207] sd 7:4:0:0: [sdai] 2930277168 512-byte hardware sectors (1500302 MB) [ 171.405207] sd 7:4:0:0: [sdai] Write Protect is off [ 171.405207] sd 7:4:0:0: [sdai] Mode Sense: 00 3a 00 00 [ 171.405207] sd 7:4:0:0: [sdai] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 171.405207] sdai: sdai1 [ 178.128973] sd 7:4:0:0: [sdai] Attached SCSI disk [ 178.128973] sd 8:0:0:0: [sdaj] 2930277168 512-byte hardware sectors (1500302 MB) [ 178.128973] sd 8:0:0:0: [sdaj] Write Protect is off [ 178.128973] sd 8:0:0:0: [sdaj] Mode Sense: 00 3a 00 00 [ 178.128973] sd 8:0:0:0: [sdaj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 178.128973] sd 8:0:0:0: [sdaj] 2930277168 512-byte hardware sectors (1500302 MB) [ 178.128973] sd 8:0:0:0: [sdaj] Write Protect is off [ 178.128973] sd 8:0:0:0: [sdaj] Mode Sense: 00 3a 00 00 [ 178.128973] sd 8:0:0:0: [sdaj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 178.128973] sdaj: sdaj1 [ 178.615872] sd 8:0:0:0: [sdaj] Attached SCSI disk [ 178.615872] sd 8:1:0:0: [sdak] 2930277168 512-byte hardware sectors (1500302 MB) [ 178.615872] sd 8:1:0:0: [sdak] Write Protect is off [ 178.615872] sd 8:1:0:0: [sdak] Mode Sense: 00 3a 00 00 [ 178.615872] sd 8:1:0:0: [sdak] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 178.615872] sd 8:1:0:0: [sdak] 2930277168 512-byte hardware sectors (1500302 MB) [ 178.615872] sd 8:1:0:0: [sdak] Write Protect is off [ 178.615872] sd 8:1:0:0: [sdak] Mode Sense: 00 3a 00 00 [ 178.615872] sd 8:1:0:0: [sdak] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 178.615872] sdak: sdak1 [ 185.046650] sd 8:1:0:0: [sdak] Attached SCSI disk [ 185.046650] sd 8:2:0:0: [sdal] 2930277168 512-byte hardware sectors (1500302 MB) [ 185.046650] sd 8:2:0:0: [sdal] Write Protect is off [ 185.046650] sd 8:2:0:0: [sdal] Mode Sense: 00 3a 00 00 [ 185.052908] sd 8:2:0:0: [sdal] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 185.052908] sd 8:2:0:0: [sdal] 2930277168 512-byte hardware sectors (1500302 MB) [ 185.052908] sd 8:2:0:0: [sdal] Write Protect is off [ 185.052908] sd 8:2:0:0: [sdal] Mode Sense: 00 3a 00 00 [ 185.052908] sd 8:2:0:0: [sdal] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 185.052908] sdal: sdal1 [ 191.429164] sd 8:2:0:0: [sdal] Attached SCSI disk [ 191.429164] sd 8:3:0:0: [sdam] 2930277168 512-byte hardware sectors (1500302 MB) [ 191.429164] sd 8:3:0:0: [sdam] Write Protect is off [ 191.429164] sd 8:3:0:0: [sdam] Mode Sense: 00 3a 00 00 [ 191.429164] sd 8:3:0:0: [sdam] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 191.429164] sd 8:3:0:0: [sdam] 2930277168 512-byte hardware sectors (1500302 MB) [ 191.429164] sd 8:3:0:0: [sdam] Write Protect is off [ 191.429164] sd 8:3:0:0: [sdam] Mode Sense: 00 3a 00 00 [ 191.429164] sd 8:3:0:0: [sdam] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 191.429164] sdam: sdam1 [ 197.761870] sd 8:3:0:0: [sdam] Attached SCSI disk [ 197.761870] sd 8:4:0:0: [sdan] 2930277168 512-byte hardware sectors (1500302 MB) [ 197.761870] sd 8:4:0:0: [sdan] Write Protect is off [ 197.761870] sd 8:4:0:0: [sdan] Mode Sense: 00 3a 00 00 [ 197.761870] sd 8:4:0:0: [sdan] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 197.761870] sd 8:4:0:0: [sdan] 2930277168 512-byte hardware sectors (1500302 MB) [ 197.761870] sd 8:4:0:0: [sdan] Write Protect is off [ 197.761870] sd 8:4:0:0: [sdan] Mode Sense: 00 3a 00 00 [ 197.761870] sd 8:4:0:0: [sdan] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 197.761870] sdan: sdan1 [ 203.979367] sd 8:4:0:0: [sdan] Attached SCSI disk [ 203.979367] sd 9:0:0:0: [sdao] 2930277168 512-byte hardware sectors (1500302 MB) [ 203.979367] sd 9:0:0:0: [sdao] Write Protect is off [ 203.979367] sd 9:0:0:0: [sdao] Mode Sense: 00 3a 00 00 [ 203.979367] sd 9:0:0:0: [sdao] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 203.979367] sd 9:0:0:0: [sdao] 2930277168 512-byte hardware sectors (1500302 MB) [ 203.979367] sd 9:0:0:0: [sdao] Write Protect is off [ 203.979367] sd 9:0:0:0: [sdao] Mode Sense: 00 3a 00 00 [ 203.979367] sd 9:0:0:0: [sdao] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 203.979367] sdao: sdao1 [ 204.458415] sd 9:0:0:0: [sdao] Attached SCSI disk [ 204.458415] sd 9:1:0:0: [sdap] 2930277168 512-byte hardware sectors (1500302 MB) [ 204.459851] sd 9:1:0:0: [sdap] Write Protect is off [ 204.459851] sd 9:1:0:0: [sdap] Mode Sense: 00 3a 00 00 [ 204.459851] sd 9:1:0:0: [sdap] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 204.459851] sd 9:1:0:0: [sdap] 2930277168 512-byte hardware sectors (1500302 MB) [ 204.459851] sd 9:1:0:0: [sdap] Write Protect is off [ 204.459851] sd 9:1:0:0: [sdap] Mode Sense: 00 3a 00 00 [ 204.459851] sd 9:1:0:0: [sdap] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 204.459851] sdap: sdap1 [ 210.766759] sd 9:1:0:0: [sdap] Attached SCSI disk [ 210.766759] sd 9:2:0:0: [sdaq] 2930277168 512-byte hardware sectors (1500302 MB) [ 210.766760] sd 9:2:0:0: [sdaq] Write Protect is off [ 210.766760] sd 9:2:0:0: [sdaq] Mode Sense: 00 3a 00 00 [ 210.766760] sd 9:2:0:0: [sdaq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 210.766760] sd 9:2:0:0: [sdaq] 2930277168 512-byte hardware sectors (1500302 MB) [ 210.766760] sd 9:2:0:0: [sdaq] Write Protect is off [ 210.766760] sd 9:2:0:0: [sdaq] Mode Sense: 00 3a 00 00 [ 210.766760] sd 9:2:0:0: [sdaq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 210.766760] sdaq: sdaq1 [ 217.105974] sd 9:2:0:0: [sdaq] Attached SCSI disk [ 217.105974] sd 9:3:0:0: [sdar] 2930277168 512-byte hardware sectors (1500302 MB) [ 217.105974] sd 9:3:0:0: [sdar] Write Protect is off [ 217.105974] sd 9:3:0:0: [sdar] Mode Sense: 00 3a 00 00 [ 217.105974] sd 9:3:0:0: [sdar] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 217.105974] sd 9:3:0:0: [sdar] 2930277168 512-byte hardware sectors (1500302 MB) [ 217.105974] sd 9:3:0:0: [sdar] Write Protect is off [ 217.105974] sd 9:3:0:0: [sdar] Mode Sense: 00 3a 00 00 [ 217.105974] sd 9:3:0:0: [sdar] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 217.105974] sdar: sdar1 [ 223.358320] sd 9:3:0:0: [sdar] Attached SCSI disk [ 223.358320] sd 9:4:0:0: [sdas] 2930277168 512-byte hardware sectors (1500302 MB) [ 223.358320] sd 9:4:0:0: [sdas] Write Protect is off [ 223.358320] sd 9:4:0:0: [sdas] Mode Sense: 00 3a 00 00 [ 223.358320] sd 9:4:0:0: [sdas] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 223.358320] sd 9:4:0:0: [sdas] 2930277168 512-byte hardware sectors (1500302 MB) [ 223.358320] sd 9:4:0:0: [sdas] Write Protect is off [ 223.358320] sd 9:4:0:0: [sdas] Mode Sense: 00 3a 00 00 [ 223.358320] sd 9:4:0:0: [sdas] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 223.358320] sdas: sdas1 [ 229.732404] sd 9:4:0:0: [sdas] Attached SCSI disk [ 230.464035] md: linear personality registered for level -1 [ 230.466432] md: multipath personality registered for level -4 [ 230.466432] md: raid0 personality registered for level 0 [ 230.469688] md: raid1 personality registered for level 1 [ 230.472507] xor: automatically using best checksumming function: generic_sse [ 230.489782] generic_sse: 12680.000 MB/sec [ 230.489782] xor: using function: generic_sse (12680.000 MB/sec) [ 230.489782] async_tx: api initialized (async) [ 230.558461] raid6: int64x1 3078 MB/s [ 230.625764] raid6: int64x2 4141 MB/s [ 230.693066] raid6: int64x4 3642 MB/s [ 230.760521] raid6: int64x8 2384 MB/s [ 230.828521] raid6: sse2x1 5472 MB/s [ 230.896521] raid6: sse2x2 5892 MB/s [ 230.964521] raid6: sse2x4 9967 MB/s [ 230.964521] raid6: using algorithm sse2x4 (9967 MB/s) [ 230.964521] md: raid6 personality registered for level 6 [ 230.964521] md: raid5 personality registered for level 5 [ 230.964521] md: raid4 personality registered for level 4 [ 230.976368] md: raid10 personality registered for level 10 [ 231.360640] md: bind[ 231.361450] md: bind [ 231.361450] md: bind [ 231.361832] md: bind [ 231.361851] md: bind [ 231.362226] md: bind [ 231.362226] md: bind [ 231.362544] md: bind [ 231.362544] md: bind [ 231.362852] md: bind [ 231.362875] md: bind [ 231.363144] md: bind [ 231.363187] md: bind [ 231.363415] md: bind [ 231.363502] md: bind [ 231.363689] md: bind [ 231.363818] md: bind [ 231.363983] md: bind [ 231.364108] md: bind [ 231.364318] md: bind [ 231.364464] md: bind [ 231.364537] md: bind [ 231.364774] md: bind [ 231.364855] md: bind [ 231.365094] md: bind [ 231.365176] md: bind [ 231.365417] md: bind [ 231.365500] md: bind [ 231.365742] md: bind [ 231.365825] md: bind [ 231.366058] md: bind [ 231.366145] md: bind [ 231.366385] md: bind [ 231.366460] md: bind [ 231.366700] md: bind [ 231.366784] md: bind [ 231.367025] md: bind [ 231.367085] md: bind [ 231.367352] md: bind [ 231.367356] md: bind [ 231.367667] md: bind [ 231.367667] md: bind [ 231.367896] md: bind [ 231.368157] md: bind [ 231.368169] md: bind [ 231.377302] raid5: device sdan1 operational as raid disk 0 [ 231.377304] raid5: device sdap1 operational as raid disk 42 [ 231.377305] raid5: device sdao1 operational as raid disk 41 [ 231.377306] raid5: device sdam1 operational as raid disk 40 [ 231.377307] raid5: device sdal1 operational as raid disk 39 [ 231.377308] raid5: device sdak1 operational as raid disk 38 [ 231.377309] raid5: device sdaj1 operational as raid disk 37 [ 231.377310] raid5: device sdai1 operational as raid disk 36 [ 231.377312] raid5: device sdah1 operational as raid disk 35 [ 231.377313] raid5: device sdag1 operational as raid disk 34 [ 231.377314] raid5: device sdaf1 operational as raid disk 33 [ 231.377315] raid5: device sdae1 operational as raid disk 32 [ 231.377316] raid5: device sdad1 operational as raid disk 31 [ 231.377317] raid5: device sdac1 operational as raid disk 30 [ 231.377318] raid5: device sdab1 operational as raid disk 29 [ 231.377319] raid5: device sdaa1 operational as raid disk 28 [ 231.377320] raid5: device sdz1 operational as raid disk 27 [ 231.377322] raid5: device sdy1 operational as raid disk 26 [ 231.377323] raid5: device sdx1 operational as raid disk 25 [ 231.377324] raid5: device sdw1 operational as raid disk 24 [ 231.377325] raid5: device sdv1 operational as raid disk 23 [ 231.377326] raid5: device sdu1 operational as raid disk 22 [ 231.377327] raid5: device sdt1 operational as raid disk 21 [ 231.377328] raid5: device sds1 operational as raid disk 20 [ 231.377329] raid5: device sdr1 operational as raid disk 19 [ 231.377330] raid5: device sdq1 operational as raid disk 18 [ 231.377331] raid5: device sdp1 operational as raid disk 17 [ 231.377332] raid5: device sdo1 operational as raid disk 16 [ 231.377333] raid5: device sdn1 operational as raid disk 15 [ 231.377334] raid5: device sdm1 operational as raid disk 14 [ 231.377335] raid5: device sdl1 operational as raid disk 13 [ 231.377337] raid5: device sdk1 operational as raid disk 12 [ 231.377338] raid5: device sdj1 operational as raid disk 11 [ 231.377339] raid5: device sdi1 operational as raid disk 10 [ 231.377340] raid5: device sdh1 operational as raid disk 9 [ 231.377341] raid5: device sdg1 operational as raid disk 8 [ 231.377342] raid5: device sdf1 operational as raid disk 7 [ 231.377343] raid5: device sde1 operational as raid disk 6 [ 231.377344] raid5: device sdd1 operational as raid disk 5 [ 231.377345] raid5: device sdc1 operational as raid disk 4 [ 231.377346] raid5: device sdb1 operational as raid disk 3 [ 231.377347] raid5: device sda1 operational as raid disk 2 [ 231.377348] raid5: device sdas1 operational as raid disk 1 [ 231.378282] raid5: allocated 45224kB for md0 [ 231.378282] raid5: raid level 6 set md0 active with 43 out of 43 devices, algorithm 2 [ 231.378282] RAID5 conf printout: [ 231.378282] --- rd:43 wd:43 [ 231.378282] disk 0, o:1, dev:sdan1 [ 231.378282] disk 1, o:1, dev:sdas1 [ 231.378282] disk 2, o:1, dev:sda1 [ 231.378282] disk 3, o:1, dev:sdb1 [ 231.378282] disk 4, o:1, dev:sdc1 [ 231.378282] disk 5, o:1, dev:sdd1 [ 231.378282] disk 6, o:1, dev:sde1 [ 231.378282] disk 7, o:1, dev:sdf1 [ 231.378282] disk 8, o:1, dev:sdg1 [ 231.378282] disk 9, o:1, dev:sdh1 [ 231.378282] disk 10, o:1, dev:sdi1 [ 231.378282] disk 11, o:1, dev:sdj1 [ 231.378282] disk 12, o:1, dev:sdk1 [ 231.378282] disk 13, o:1, dev:sdl1 [ 231.378282] disk 14, o:1, dev:sdm1 [ 231.378282] disk 15, o:1, dev:sdn1 [ 231.378282] disk 16, o:1, dev:sdo1 [ 231.378282] disk 17, o:1, dev:sdp1 [ 231.378282] disk 18, o:1, dev:sdq1 [ 231.378282] disk 19, o:1, dev:sdr1 [ 231.378282] disk 20, o:1, dev:sds1 [ 231.378282] disk 21, o:1, dev:sdt1 [ 231.378282] disk 22, o:1, dev:sdu1 [ 231.378282] disk 23, o:1, dev:sdv1 [ 231.378282] disk 24, o:1, dev:sdw1 [ 231.378282] disk 25, o:1, dev:sdx1 [ 231.378282] disk 26, o:1, dev:sdy1 [ 231.378282] disk 27, o:1, dev:sdz1 [ 231.378282] disk 28, o:1, dev:sdaa1 [ 231.378282] disk 29, o:1, dev:sdab1 [ 231.378282] disk 30, o:1, dev:sdac1 [ 231.378282] disk 31, o:1, dev:sdad1 [ 231.378282] disk 32, o:1, dev:sdae1 [ 231.378282] disk 33, o:1, dev:sdaf1 [ 231.378282] disk 34, o:1, dev:sdag1 [ 231.378282] disk 35, o:1, dev:sdah1 [ 231.378282] disk 36, o:1, dev:sdai1 [ 231.378282] disk 37, o:1, dev:sdaj1 [ 231.378282] disk 38, o:1, dev:sdak1 [ 231.378282] disk 39, o:1, dev:sdal1 [ 231.378282] disk 40, o:1, dev:sdam1 [ 231.378282] disk 41, o:1, dev:sdao1 [ 231.378282] disk 42, o:1, dev:sdap1 [ 231.458439] PM: Starting manual resume from disk [ 231.490440] kjournald starting. Commit interval 5 seconds [ 231.490440] EXT3-fs: mounted filesystem with ordered data mode. [ 232.582165] udevd version 125 started [ 233.241025] input: Power Button (FF) as /class/input/input1 [ 233.297631] ACPI: Power Button (FF) [PWRF] [ 233.297685] input: Sleep Button (CM) as /class/input/input2 [ 233.362291] ACPI: Sleep Button (CM) [SLPB] [ 233.362320] input: Power Button (CM) as /class/input/input3 [ 233.427345] ACPI: Power Button (CM) [PWRB] [ 233.480203] agpgart: Detected an Intel G45/G43 Chipset. [ 233.481342] agpgart: Detected 32764K stolen memory. [ 233.493170] agpgart: AGP aperture is 256M @ 0xd0000000 [ 233.649383] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18 [ 233.654492] input: PC Speaker as /class/input/input4 [ 233.749338] myri10ge: Version 1.5.0 [ 233.749338] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 233.749338] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 233.749338] mtrr: type mismatch for e0000000,1000000 old: write-back new: write-combining [ 234.029362] Error: Driver 'pcspkr' is already registered, aborting... [ 234.449025] myri10ge 0000:01:00.0: MSI IRQ 1274, tx bndry 4096, fw myri10ge_eth_z8e.dat, WC Disabled [ 234.449078] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 234.449093] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 234.449025] udev: renamed network interface eth1 to eth2 [ 234.485592] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 235.513856] Adding 7831676k swap on /dev/hda2. Priority:-1 extents:1 across:7831676k [ 235.954690] EXT3 FS on hda1, internal journal [ 236.516132] loop: module loaded [ 236.781295] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 236.781295] SGI XFS Quota Management subsystem [ 236.781887] Filesystem "md0": Disabling barriers, not supported by the underlying device [ 236.781887] XFS mounting filesystem md0 [ 237.126522] Ending clean XFS mount for filesystem: md0 [ 237.841364] myri10ge: eth2: link down [ 237.917215] myri10ge: eth2: link up [ 241.373854] eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 244.067296] NET: Registered protocol family 10 [ 244.067296] lo: Disabled Privacy Extensions [ 254.180901] eth2: no IPv6 routers present [ 255.064894] eth0: no IPv6 routers present